Analytical and experimental studies conducted at the NASA Langley Research Center for investigating integrated cryogenic propellant tank systems for a Reusable Launch Vehicle are described. The cryogenic tanks are investigated as an integrated tank system. An integrated tank system includes the tank wall, cryogenic insulation, Thermal Protection System (TPS) attachment sub-structure, and TPS. A...

It is common to use sound insulation as a last resort for noise control in an urban city. Sound insulation of air-conditioned building is of importance. The stiffeners have important effects on the sound insulation properties of a stiffened structure. The experimental studies on the stiffened structures are vital for the study of the stiffener effects. Based on this concern, a simple stiffened ...

Design of Converter transformer insulation is a major challenge. The insulation of these transformers is stressed by both AC and DC voltages. Particle contamination is one of the major problems in insulation structures, as they generate partial discharges leading it to major failure of insulation. Similarly corona discharges occur in transformer insulation. This partial discharge due to particl...

A patient is described in whom myopotentials orginating from the anterior abdominal wall muscle suppressed the implanted demand pacemaker despite its bipolar mode of action. This phenomenon was shown by simultaneous recording of the electrocardiogram the electromyogram. At operation, a defect in the insulation of a previously repaired epicardial electrode was found lying in close proximity to t...

This paper presents one approach in developing a PHM-based reconfigurable controls framework. A low-level reconfigurable controller is defined as a time-varying multi-objective criterion function and appropriate constraints to determine optimal set-point reconfiguration. A set of necessary conditions are established to ensure the stability and boundedness of the composite system. In addition, t...

− Test of insulation resistance is pre-requisite for leakage effect evaluation in many electrical measurements. Especially high resistance measurement at low working voltage is often required for evaluation of high precision measurement system. The high resistance measurement at low voltage level with portable hand-set is a challenging task. Here we suggest a simple and convenient method to mea...

An improved mathematical model describing acoustic emission (AE) signals generated by different types of partial discharges (PD) that occur in electric power transformer insulation system is presented in the paper. AE signals are analyzed within the AE method as applied for power transformer failure detection due to occurrence of PD. There are several types of basic defects, which are character...

Development of effective electrical magnetohydrodynamic (MHD) coating insulating induced current path is one of key fusion technologies for fusion blanket research and development. Electrical insulation coating is extremely important for lead lithium (PbLi) MHD thermofluid study from pointview of secure electric insulating wall condition. The alumina (Al2O3) coatings fabricated by a sol-gel met...

New European product standards now include a mandatory requirement for manufacturers to declare the temperature-dependent thermal conductivity for each insulation used in building equipments and industrial installations. For pipe insulation systems, the measurement is usually performed by a standard pipe test method, in which the value on a large temperature range is integrated to reduce temper...

Improved detection of thermal insulation efficiency in buildings could substantially contribute to reductions in energy consumption and the carbon footprint of domestic heating systems. Thermal insulation standards are now contractual obligations at the construction stage, although they are not standardized in buildings that are already in operation: lighting, occupancy and temperature profiles...