Emerald ash borer, Agrilus planipennis Fairmaire, an Asian wood-boring beetle, has devastated ash (Fraxinus spp.) trees in North American forests and landscapes since its discovery there in 2002. In this study, we collected living larvae from EAB-resistant Manchurian ash (Fraxinus mandschurica), and susceptible white (Fraxinus americana) and green (Fraxinus pennsylvanica) ash hosts, and quantif...

Heat treatment may result in variation of wood equilibrium moisture content (EMC). During this study, tauari (Couratari oblongifolia), ash (Fraxinus excelsior), and oak (Quercus rubra) woods were heat-treated at 190, 200, and 210oC for 3 hours and then put into a conditioning chamber with a temperature from 30 to 75oC and a relative humidity from 50 to 90%. The isothermal moisture adsorption cu...

The dulling of cemented carbide cutting tools after milling five African wood species was studied. The wood specimens investigated varied in high temperature corrosivity (HTC), hard mineral contamination (HMC), and density (D). Attempts to replace the combustion method of evaluating the content of natural HMC in wood with spectral mass analysis methods, such as energy dissipative spectrum (EDAX...

Caesalpinia span heartwood is used in folklore in India. The present work attempts to summarize the pharmacognostical characters of the heartwood of this plant. Ash and extractive values, phytochemical tests, HPTLC and fluorescence analysis were carried out. The present work contributes for the standardization of this medicinal heat wood.

This study was an attempt to produce bio-oil from empty fruit bunches (EFB) of oil palm waste using fast pyrolysis technology. A 150 g/h fluidised bed bench scale fast pyrolysis unit operating at atmospheric pressure was used to obtain the pyrolysis liquid. A comparison of the elemental composition of unwashed and washed feedstock was made in this study. With the five methods of treatment being...

Entrained flow gasification of biomass using the cyclone principle has been proposed in combination with a gas engine as a method for combined heat and power production in small to medium scale (<20 MW). This type of gasifier also has the potential to operate using ash rich fuels since the reactor temperature is lower than the ash melting temperature and the ash can be separated after being col...

Agricultural producers are interested in using biomass available on farms to substitute fossil fuels for heat production. However, energy crops like reed canary grass contain high nitrogen (N), sulfur (S), potassium (K) and other ash-forming elements which lead to increased emissions of gases and particulate matter (PM) and ash-related operational problems (e.g., melting) during combustion. To ...

Ash species (Fraxinus spp.) in Europe are threatened by the Emerald Ash Borer (Agrilus planipennis, EAB), an invasive wood boring beetle native to East Asia and currently spreading from European Russia westwards. Based on a high-resolution habitat distribution map (grid cell size: 25 × 25 m) and data on distribution and abundance of Common Ash (Fraxinus excelsior), the most widespread and highl...

Waste residues produced by agricultural and forestry industries can generate energy and are regarded as a promising source of sustainable fuels. Pyrolysis, where waste biomass is heated under low-oxygen conditions, has recently attracted attention as a means to add value to these residues. The material is carbonized and yields a solid product known as biochar. In this study, eight types of biom...

This paper proposes, for low buildings, an integrated wall structure of a brick-stem-insulating layer, which plays a major part in both heat preservation and force bearing. The research team has tested the thermal performance of the structure, the results of which are satisfying. To further study the force-bearing performance, the paper carries out compressive tests of specimens of different st...