This paper introduces a micro direct methanol fuel cell (μDMFC) with an imbedded self-pumping mechanism to deliver liquid fuel. The fuel is propelled without any power consuming component (e.g., a pump), while removing the CO2 bubbles generated by the fuel-cell electrochemical reaction of the system. Furthermore, the pumping rate is self-regulated by the reaction, i.e., by the load. By eliminat...

Correction for 'All-solid-state Z-scheme system arrays of Fe2V4O13/RGO/CdS for visible light-driving photocatalytic CO2 reduction into renewable hydrocarbon fuel' by Ping Li et al., Chem. Commun., 2015, 51, 800-803.

The aim of the research is to test the fuel additives which decrease dimensions of atomised fuel drops, by applying changes to the specific parameters which impact the atomisation process. Those parameters include density, surface tension, viscosity and the viscosity index. Dimensions of drops of biofuels are much bigger compared to hydrocarbon fuels. By modifying the physical and chemical para...

the manner of spray the fuel has an important effect on stability and convenient mixture of fuel and oxidizer. swirl injectors because of formation of uniform spray cone and proper distribution of the fuel have been used in many rocket engines at aerospace industries. formation and development of air core in the interior stream of swirl injectors and simulation of them is complicated. double ba...

waste low density polyethylenes (ldpe) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. the effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. the effect of catalyst o...

A new dual-fluid concept was studied that could eventually find application for cold-gas propulsion for small space satellites or other constant flow applications. In basic form, the concept uses two different refrigerant working fluids, each having a different saturation vapor pressure. The higher vapor pressure refrigerant remains in the saturation phase and is used to pressurize the lower sa...

The CFD models JASMINE and SOFIE have been used to simulate the convection currents and thermal conditions inside one steel compartment due to a fire in an adjacent compartment. The impact, on the thermal environment inside the steel compartment, of the positioning of the adjacent fire in both 'side-heated' and 'bottom-heated' configurations has been examined. For the side-heated configuration,...