Cohesive-frictional soils are widely used in the construction of embankment structures and due to the method of construction, i.e. applying compactive efforts in the vertical direction in these cases, the occurrence of anisotropy in the soil strength and permeability seems to be inevitable. In this study, attempts have been made to evaluate the shear strength of c-f soils through modifying a l...

thermomechanical control process steel produced by rolling has a significant anisotropy. the elongated grains and inclusions formed during hot rolling of ferrite and low carbon hsla steels directly influence the anisotropy of the steel’s mechanical properties as a result of microstructural anisotropy. the present research deals with this anisotropy, and particular attention has been paid to the...

Detailed finite element modeling of the human body offers a potential major enhancement to the prediction of injury risk during vehicle impacts. Currently, vehicle crash safety countermeasure development is based on a combination of testing with established anthropomorphic test devices (i.e., ATD or dummy) and a mixture of multi­ body (dummy) and finite element (vehicle) modeling. If a relative...

Orientation imaging microscopy has been used to investigate the effects of Nb doping on the grain boundary plane distributions in TiO2 (rutile). By comparing the grain boundary plane distribution of the undoped material with theoretical estimates of grain boundary energy anisotropy of pure rutile, it is possible to show that the frequency of grain boundary planes is inversely correlated with gr...

All-spin logic devices are promising candidates to augment and complement beyond-CMOS integrated circuit computing due to non-volatility, ultra-low operating voltages, higher logical efficiency, and high density integration. However, the path to reach lower energy-delay product performance compared to CMOS transistors currently is not clear. We show that scaling and engineering the nanoscale ma...

Friction characteristics with respect to surface topographic orientation were investigated using surfaces of different materials and fabricated with grooves of different scales. Scratching friction tests were conducted using a nano-indentation-scratching system with the tip motion parallel or perpendicular to the groove orientation. Similar friction anisotropy trends were observed for all the s...

Electromagnetic invisibility cloak requires material with anisotropic distribution of the constitutive parameters as first proposed by Pendry et al. [Science 312, 1780 (2006)]. In this paper, we proposed an electromagnetic cloak structure that does not require metamaterials with subwavelength structured inclusions to realize the anisotropy or inhomogeneity of the material parameters. We constru...

Electroconvection (EC) phenomena have been investigated in the nematic phase of a bent-core oxadiazole material with negative dielectric anisotropy and a frequency dependent conductivity anisotropy. The formation of longitudinal roll (LR) patterns is one of the predominant features observed in the complete frequency and voltage range studied. At voltages much above the LR threshold, various com...

The bending-induced polarization of barium titanate single crystals has been measured with an aim to elucidate the origin of the large difference between theoretically predicted and experimentally measured flexoelectricity in this material. The results indicate that part of the difference is due to polar regions (short-range order) that exist above T(C) and up to T*≈200-225 °C. Above T*, howeve...

Purpose. This study examined the influence of anisotropic material for human sclera. Method. First, the individual geometry of patient-specific sclera was reproduced from a laser scan. Then, high quality finite element modeling of individual sclera was performed using a convenient automatic hexahedral mesh generator based on harmonic field and integrated with anisotropic material assignment fun...