Deep drawing of two-layer sheet is a suitable way to achieve product with a desired shape and desired properties in sheet metal forming technology. Control of deep drawing parameter such as thinning is the most important challenge in this process. The most difficult part of this challenge is differences in material properties and geometry of each layer. In this paper, numerical approach has bee...

In the laser cutting process some well-known parameters, e.g. laser power and cutting speed, play major roles in the performance of the process. Each parameter or a combination of parameters can affect the material removal volume and cutting volume efficiency. The purpose of this research is to study the effect of power and maximum cutting speed on the material removal rate (MRR) and cutting vo...

Data is presented from experimental measurements of the local grammage and thickness made on laboratory formed sheets with a range of structures. We observe that the distributions of local grammage and local thickness are strongly correlated. The correlation between the variances of thickness and grammage are dependent on pulp type but independent of mean sheet grammage, whereas the correlation...

We report a nonlinear finite element analysis (FEA) of the thermo-mechanical shrinking and self-folding behavior of pre-strained polystyrene polymer sheets. Self-folding is useful for actuation, packaging, and remote deployment of flat surfaces that convert to 3D objects in response to a stimulus such as heat. The proposed FEA model accounts for the viscoelastic recovery of pre-strained polysty...

The performance of carbon rod (CR), titanium sheet (TS), stainless steel woven mesh (SSM) and copper sheet (CS) cathode materials are investigated in microbial fuel cells (MFCs) for simultaneous electricity generation and Cu(II) reduction, in multiple batch cycle operations. After 12 cycles, the MFC with CR exhibits 55% reduction in the maximum power density and 76% increase in Cu(II) removal. ...

Several factors must be considered when designing parts that are being made by bending. The primary factor is minimum radius and angle of bending that can be bent successfully without metal cracking. Low carbon steel metal (st37), manufactured by Libyan Iron and steel Company, was used in this study. Various bending processes by Vee die for different radii and calculate thickness were conducted...