Due to their large compatibility difference, polyethylene (PE) and polyoxymethylene (POM) cannot be welded together by laser transmission welding. In this study, PE and POM are pretreated using plasma that significantly enhances their laser transmission welding strength. To understand the mechanism underlying the laser welding strength enhancement, surface modification is analyzed using contact...

Gas metal arc welding (GMAW) is a highly efficient and fast process for fabricating high quality weld. High quality welds are fabricated by proper selection of consumable includes gas and filler metals. The optimum flow rate of gas will ensure the proper quality of weld. In this project, a fluid flow behavior of different flow rate is modeled and the change quality will be studied. KeywordsHydr...

Ultraviolet radiation (UVR) emitted during arc welding frequently causes keratoconjunctivitis and erythema. The extent of the hazard of UVR varies depending on the welding method and conditions. Therefore, it is important to identify the levels of UVR that are present under various conditions. In this study, we experimentally evaluated the hazard of UVR emitted in gas tungsten arc welding (GTAW...

It was generally observed that welders in Calabar, Nigeria did not always wear their protective goggles during welding. Since chronic exposure to welding light can impair vision this study was done to assess the effect of exposure to welding light on ocular function of welders in Calabar, Nigeria. There were 195 subjects comprising 110 welders (test) and 85 control subjects. Both groups were al...

A study was conducted on the arc and melting efficiency of the plasma arc, gas tungsten arc, gas metal arc, and submerged arc welding processes. The results of this work are extended to develop a quantitative method for estimating weld metal dilution in a companion paper. Arc efficiency was determined as a function of current for each process using A36 steel base metal. Melting efficiency was e...

OBJECTIVES Ultraviolet radiation (UVR) emitted during arc welding frequently causes keratoconjunctivitis and erythema in the workplace. The degree of hazard from UVR exposure depends on the welding method and conditions. Therefore, it is important to identify the UVR levels present under various conditions. METHODS We experimentally evaluated the UVR levels emitted in gas metal arc welding (G...

Stud arc welding has become one of the most important unit operations in the mechanical industries. The need to reduce the time from product discovery to market introduction is inevitable. Reducing of standard deviation of tensile strength with desirable tensile strength joint as a performance character was use to illustrate the design procedure. The effects of (welding time, welding current, s...

Background: Hazardous chemical agents in the welding operation are a mixture of metal fumes and toxic gases, the inhalation of which causes adverse health effects among welders. The emission of gases in the workplace is a logical cause for concern regarding the potential development of respiratory disease. The aim of the present study was to determine the concentration values of gases discharge...

Submerged Arc welding process is automated and semiautomated high deposition down hand welding process not vertical or over welding process, The fundamental difference of this welding process is that the Arc is not visible it is submerged into the flux. Weldment is fully submerged the heat loss is minimum and the thermal efficiency is very high up to 80-90%. A constant power sources and control...

Welding fume contains elements that, in their pure forms, can be hazardous to worker health if inhaled or ingested. Therefore, the chemical composition of welding fume must be examined when considering fume toxicity. Various chemical analysis techniques are presented and their applicability to airborne particles is described. Knowledge of particle size is important because a given characterizat...