We present a simple and effective method for the postfabrication trimming of optical microresonators. We photobleach CLD-1 chromophores to tune the resonance wavelengths of polymer microring resonator optical notch filters. A maximum wavelength shift of -8.73 nm is observed. The resonators are fabricated with a soft-lithography molding technique and have an intrinsic Q value of 2.6 x 10(4) and ...

Silicon resonant microdisk and microring modulators and switches based on free-carrier depletion and injection were designed and fabricated with the aim of minimizing device radius to theoretical bend-radiation imposed limits. Minimizing device area serves to simultaneously maximize resonator free-spectral-range, minimize switching energy, and maximize component density, all critical parameters...

A novel bandwidth tunable bandpass filter based on a silicon microring-MZI structure is proposed and demonstrated. By thermally tuning the resonance offset between the two microring resonators, and adding the two drop transmissions together, the bandwidth of the microring-MZI filter can be easily linearly tuned with low in-band ripples. Key words—bandwidth tunable; thermal tunable; optical filt...

In this paper we propose a set of novel tunable optical power splitters based on active microring resonators. They work by operating ring resonators in the transient zone between full resonance and off-resonance states for a specific wavelength. We can achieve different split ratios by either varying the bias voltage, or by selectively enabling a given resonator with a specific split ratio amon...

We have constructed and characterized several optical microring resonators with scale sizes of the order of 10 microm. These devices are intended to serve as building blocks for engineerable linear and nonlinear photonic media. Light is guided vertically by an epitaxially grown structure and transversely by deeply etched air-clad sidewalls. We report on the spectral phase transfer characteristi...

We study the effects of metal-coated fiber near-field probes on the performance of nanophotonic devices. Employing a heterodyne near-field scanning optical microscope and analyzing transmission characteristics, we find that a metal-coated probe can typically introduce a 3 dB intensity loss and a 0.2 rad phase shift during characterization of a straight waveguide made in a silicon-on-insulator s...

We have used near-field scanning optical microscopy to measure the internal optical modes inside glass waveguides and microring resonators. The period of the observed standing modes provides a direct measure of the local effective index. The measured effective index and modal shape determines the values of all components of the wave vector. The observed standing modes inside the ring resonator ...

An approach to optimize the sensitivity and limit of detection on-chip refractive index sensor is proposed demonstrated based on sub-wavelength grating racetrack microring resonator Vernier effect. The waveguide can reduce structure limitation light field, which beneficial enhancing interaction between photon analyte. By optimizing parameters resonator, could be significantly improved 664 nm/RI...