Nonlinear dynamics of semiconductor lasers has found many interesting applications in microwave photonics technology. In particular, a semiconductor laser under optical injection of proper strength and optical frequency detuning can enter into the dynamical period-one (P1) state through Hopf bifurcation. The resulting optical output carries a broadly tunable high-speed microwave modulation with...

Microwave-assisted dilute acid/alkali pretreatment is an efficient and rapid method of removing lignin and hemicellulose, however, the optimized parameters for the maximum efficiency have to date not been presented in the literature. The purpose of this study was to determine those conditions by examining the effects of three factors: microwave power, temperature, and time on delignification in...

A new method to generate ultrahigh-power microwave pulses compatible with mildly relativistic electron sources is proposed. This method involves a novel microwave compressor in the form of a metal helically corrugated waveguide, which can enhance the power of frequency-modulated nanosecond pulses up to the multigigawatt level. The results of the proof-of-principle experiments at kilowatt power ...

1. Theoretical Background It is known that electromagnetic energy also associated with the propagation of the electromagnetic waves. We can use theoretically all electromagnetic waves for a wireless power transmission (WPT). The difference between the WPT and communication systems is only efficiency. The Maxwell's Equations indicate that the electromagnetic field and its power diffuse to all di...

Abstract: Microwave processing is one of the novel methods for combustion synthesis of intermetallic compounds andcomposites. This method brings about a lot of opportunities for processing of uniquely characterized materials. In thisstudy, the combustion synthesis of TiAl/Al2O3 composite via microwave heating has been investigated by thedevelopment of a heat transfer model including a microwave...

This paper describes laboratory scale experiments examining the impact of microwave irradiation on the Granular Activated Carbon (GAC) exposed to toluene, a common organic vapor frequently released into work environment as well as outdoor. A stream containing 300 ppm toluene was supplied and passed through the granular activated carbon. The saturated adsorbent was placed in a quartz glass r...

A four-device broadband solid-state power amplifier, which is based on radial waveguide power-dividing/combining circuit, has been investigated in this work. The fabricated power amplifier combining four monolithic microwave integrated circuit power amplifiers shows a 12–16.6 dB small-signal gain over a broadband from 6 to 14 GHz. The measured maximum output power at 1 dB compression is 25.6 dB...

Electric appliances consume electricity when they are in standby mode and sometimes even in off-mode. These "losses" of each appliance individually are not large but the sum over all appliances is no longer negligible. The standby losses of ten households are investigated. The standby power varies from 7 to 134 W and has an average of 40 W. The standby consumption is on average 274 kWh/year, re...

We propose and demonstrate tunable microwave phase shifters based on electrically tunable silicon-on-insulator microring resonators. The phase-shifting range and the RF-power variation are analyzed. A maximum phase-shifting range of 0-600 degrees is achieved by utilizing a dual-microring resonator. A quasi-linear phase shift of 360 degrees with RF-power variation lower than 2dB and a continuous...