Light-trapping patterns were constructed in TiO2 photoelectrodes for dye-sensitized solar cells (DSSCs) by a one-step femtosecond laser structuring method that utilized ablation to create patterns at the surface of nanostructured TiO2 films. As a result, much more light was trapped in the photoelectrodes. Grating and orthogonal-grid patterns were studied, and the light trapping performance was ...

Nanostructured hybrid heterojunctions have been studied widely for photocatalytic applications due to their superior optical and structural properties. In this work, the impact of angstrom thick atomic layer deposited (ALD) ZnO shell layer on photocatalytic activity (PCA) of hydrothermal grown single crystalline TiO2 nanowires (NWs) is systematically explored. We showed that a single cycle of A...

We have systematically investigated the effects of surface modification of titania TiO2 in hybrid TiO2/ regioregular poly 3-hexylthiophene P3HT photovoltaic cells. By employing a series of para-substituted benzoic acids with varying dipoles and a series of multiply substituted benzene carboxylic acids, the energy offset at the TiO2/polymer interface and thus the open-circuit voltage of devices ...

TiO2 surfactant-templated nanostructured film was fabricated by supramolecular templating technique using TiCl4 and P-123 as raw material and surfactant, respectively. The film was produced by sol-gel dip coating procedure. Characterization of the product was carried out by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) specific surface areas,...

Sulfur is a cathode material for lithium-ion batteries with a high specific capacity of 1675 mAh/g. The rapid capacity fading, however, presents a significant challenge for the practical application of sulfur cathodes. Two major approaches that have been developed to improve the sulfur cathode performance include (a) fabricating nanostructured conductive matrix to physically encapsulate sulfur ...

Since 1970, TiO2 photocatalysis has been considered a possible alternative for sustainable water treatment. This is due to its material stability, abundance, nontoxicity and high activity. Unfortunately, its wide band gap (≈3.2 eV) in the UV portion of the spectrum makes it inefficient under solar illumination. Recently, so-called "black TiO2" has been proposed as a candidate to overcome this i...

Nanostructured gold supported TiO2, ZnO, and Al2O3 materials (1% w/w Au) were tested as sorbents for gaseous mercury (Hg) trapping and preconcentration. Their analytical performances were first compared with the one of traditional gold wool trap for the quantification of Hg standards injected into the argon flow followed by thermal desorption at 600°C and CVAFS detection. Good linearity and rep...

In the present paper, an experimental assessment was performed on the transient thermal performance of a heat sink filled by a phase change material (PCM) and PCM embedded with carbon nanofibers (CNFs) and titania (TiO2) nanoparticles as nanostructured materials. In order to enhance the thermal conductivity of PCM, CNFs and TiO2 nanoparticles at different loadings (0.5wt. % and 2 wt.% of CNFs a...