Liquid/gas flows are experimentally investigated in 200 and 525 mm square microchannels made of glass and silicon. Liquid and gas are mixed in a cross-shaped section in a way to produce steady and homogeneous flows of monodisperse bubbles. Two-phase flow map and transition lines between flow regimes are examined. Bubble velocity and slip ratio between liquid and gas are measured. Flow patterns ...

In this paper, a double-cyclone is used as a gas-solid separator in the fluid bed-drying process to prepare dry HDPE powder from a wet feed of 56000 kg/hr. The quality of dry HDPE depends mainly on particles behavior and flow pattern in the dryer which affect the double-cyclones as an effective equipment in this process. Controlling of the inlet carrier gas causes excellent flow pattern, desire...

A unique normalized radial pressure profile characterizes the bed of a gas-solid vortex reactor over a range of particle densities and sizes, solid capacities, and gas flow rates: 950-1240 kg/m3, 1-2 mm, 2 kg to maximum solids capacity, and 0.4-0.8 Nm3/s (corresponding to gas injection velocities of 55-110 m/s), respectively. The combined momentum conservation equations of both gas and solid ph...

co2/ch4 gas separation is a very important applicatable process in upgrading the natural gas and landfil gas recovery. in this work, to investigate the membrane separation process performance, the gas permeation results andco2/ch4 separation characteristics of different prepared membranes (via blending different molecular weights of polyethylene glycol (peg) as a modifier with acrylonitrile-but...

Compressibility factor and viscosity of natural gasses are of great importance in petroleum and chemical engineering. To calculate the natural gas properties in the pipelines, storage systems and reservoirs, the exact values of gas compressibility factor and viscosity are required. A new method that allows accurate determination of compressibility factor and gas viscosity for all types of: swee...

Measurement of the pressure-flow relationships of the human respiratory tract is basic to the study of ventilatory mechanics. The relationship of respiratory air flow to the total pressure drop along the respiratory tree (alveolus to mouth) has been extensively studied and been shown to depend on lung inflation (1-3) and the type and degree of airway disease (4). Recently the total pressure dro...

A drop impacting a solid surface with sufficient velocity will emit many small droplets creating a splash. However, splashing is completely suppressed if the surrounding gas pressure is lowered. The mechanism by which the gas affects splashing remains unknown. We use high-speed interference imaging to measure the air beneath all regions of a spreading viscous drop as well as optical absorption ...

The lift-gas allocation problem with pressure-drop constraints and well-separator routing is a mixed-integer nonlinear program considerably hard to solve. To this end, a mixed-integer linear programming formulation was developed by multidimensional piecewiselinearization of pressure drop functions using standard (CC) and logarithmic (Log) aggregated models. These models were compared by means o...