A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...

An interferometric sensor based on nonmetallic silica optical fiber is presented as an ultrasonic wideband transducer for optoacoustic imaging applications. We have characterized the sensitivity of the optical fiber sensor by detecting optoacoustic signals from an optically absorbing object embedded in a tissue-mimicking phantom and have compared the signals recorded with those detected from th...

AN ARTICLE by Belušič and Zupančič (1) described the construction of a finger pulse sensor using a singing greeting card beeper. We felt that this beeper made of piezoelectric material could be easily modified to function as a respiratory belt transducer to monitor respiratory movements. Commercially available respiratory belt transducers, such as Pneumotrace (http:// www.adinstruments.com/prod...

Received Jan 16, 2018 Revised Mar 18, 2018 Accepted Mar 31, 2018 Piezoelectric Acoustic Transducer (PAT) is a transducers used in many application such as medical diagnostic, medical ultrasonic imaging and underwater acoustic applications. Latest research, PAT were investigated in marine application and underwater acoustic imaging. Conventional PAT is design based on sensing element, Piezoelect...

The main emphasis in developing DOS has been on achieving low crosstalk (CT). CT in the order of -30 dB is acceptable in conventional DOS and below that value is hard to achieve. Relatively low drive voltage (or power requirements) is also necessary to optimized DOS. This paper depicts the design of Y-branched digital optical switches (DOS) with optimized on-chip area coverage, reduced driving ...

A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...

Over the past few decades, the propagation of acoustic signals through the human body has found application in medical imaging as well as the treatment of various ailments. Also, many new applications are being continually developed. As the demand for medical ultrasonic devices increases, so does the demand for reliable methods of characterizing the pressure output of the ultrasound transducers...

Piezoelectric transducer (PT) is the key component in power ultrasonics. Its vibration amplitude directly reflects performance of transducer. The real time measurement seldomly reported and difficult to be realized due high frequency confined space accommodate a sensor. Currently, there are no viable solutions for monitoring when tool engaged material. We present time, low-cost strategy PT, inc...

An electro-optic tunable single and multi-channel optical filter based on one-dimensional defective photonic crystal (1DDPC) structure is proposed. A couple of externally tunable defects in arrangement of (AB)5D1(BA)D2(BA)5, where A and B are dielectric materials, D1 and D2 are the tunable defects are used. The defects are composed of the ferroelectric LiNbO3 crystals and two pairs of thin Ag l...

An electro-optic tunable single and multi-channel optical filter based on one-dimensional defective photonic crystal (1DDPC) structure is proposed. A couple of externally tunable defects in arrangement of (AB)5D1(BA)D2(BA)5, where A and B are dielectric materials, D1 and D2 are the tunable defects are used. The defects are composed of the ferroelectric LiNbO3 crystals and two pairs of thin Ag l...