We investigate Bessel-like modes guided in a double cladding fiber where the outer cladding is an aircladding. For very high order LP(0X) -modes, the azimuthal symmetry is broken and the mode is no longer linearly polarized. This is observed experimentally and confirmed numerically. The effect is investigated numerically using a full vectorial modesolver and is observed to be dependent on the f...

A Cr13Ni5Si2-based composite coating was successfully deposited on copper by pulse laser induction hybrid cladding (PLIC), and its high-temperature wear behavior was investigated. Temperature evolutions associated with crack behaviors in PLIC were analyzed and compared with pulse laser cladding (PLC) using the finite element method. The microstructure and present phases were analyzed using scan...

A new silicon based waveguide with full CMOS compatibility is developed to fabricate an on-chip Bragg cladding waveguide that has an oxide core surrounded by a high index contrast cladding layers. The cladding consists of several dielectric bilayers, where each bilayer consists of a high index-contrast pair of layers of Si and Si3N4. This new waveguide guides light based on omnidirectional refl...

This paper presents an investigation on single objective optimization for CO2 laser cladding process considering clad height (H) and clad width (W) as performance characteristics. This optimization of multiple quality characteristics has been done using Genetic Algorithm (GA) approach. The aim of this work is to predict the performance characteristics (H and W) at optimized condition by applyin...

We have demonstrated fluorescent liquid-core/air-cladding (LA) waveguides suitable for use as integrated optofluidic light sources. These waveguides were fabricated by conventional soft lithography using poly(dimethylsiloxane) (PDMS). Two-phase stratified flows of air and ethylene glycol with fluorescent dye were generated along the PDMS channel. Compared to the liquid-core/liquid-cladding (L(2...

The research carried out by the authors of this paper is focused on technological process Inconel 625 welding with MAG–CMT (Metal Active Gas-Cold Metal Transfer) method. was welded to substrate material, which 16Mo3 steel. Both materials are used produce so-called bimetallic tubes, in practice serve as a part equipment intended for waste incineration. For reason, tubes must withstand extreme co...

An existing deteriorated or hydraulically undersized pipe can be replaced with a new pipe by static pipe bursting. Cavity expansion during pipe bursting induces ground movements, which may potentially damage nearby buried utilities if they are in close proximity to the pipe bursting operation. A large-scale pipe bursting experiment was performed in an 8 m long, 8 m wide, and 3 m deep test pit f...

We explore the duality between metric and material properties in the Maxwell’s equations to design metamaterial blueprints for cladding control of waveguide modes. We illustrate designs for circular and rectangular waveguides. In contrast to standard material loading of waveguides, the proposed cladding does not produce hybrid modes. The cutoff frequencies of the propagating modes can be contro...

A numerical method is presented for determining the transmittance of long-period (LP) fiber-gratings having arbitrary azimuthal/radial refractive index variations. The method uses coupled-mode theory and includes both the sine and cosine character of the LP modes. The model treats interactions between the fundamental mode and high-azimuthal-order cladding modes. The method utilizes the transfer...

A typical optical fiber is usually constructed of a silicon (glass) material, however, plastic and quartz are also available but normally for data transmission. Today most of all optical fibers manufactured consist of a lightconducting glass core surrounded by a thin layer of glass cladding with a lower refractive index. This cladding serves to protect the core finish. All fibers used in infrar...