-A pressure-shear plate impact experiment is introduced to study time-resolved friction at interfaces subjected to high sliding speeds under relatively high normal pressures. The conditions of slip at the interface are varied by changing the surface roughness of the impacting plates and by varying the applied normal to shear stress ratio. The configuration offers the simplicity of allowing the ...

There are many instances where the use of weight-saving polymer composite material for an entire structure is either too complex, too expensive or unfeasible. In these circumstances the use of a hybrid structure can incorporate the benefits of traditional (e.g. steel ) construction coupled with the advantages of composite materials [e.g. glass-reinforced polymers, glass-reinforced plastic (GRP)...

This study presents the optimal drift design method to control the elastic and inelastic performance of steel moment frames. This is formulated as a problem that minimizes the lateral displacement at the top of a building satisfying the constraints on the total structural weight and the column-to-beam strength ratios at the joints. This uses the resizing method based on the linear static analys...

This paper presents an identification method of the scalar Preisach model to consider effect reversible magnetization in process distribution function identification. By reconsidering by stripping influence components from measurement data, is identified pure irreversible components. In this way, simulation accuracy both limiting hysteresis loops and inner internal symmetrical small loop ensure...

In this paper, nonlinear behavior of strengthened steel plate shear walls (SPSWs) by FRP laminates theoretically and numerically has been investigated. In the first part, a new method, “the composite-plate frame Interaction (C-PFI) method”, has been introduced to predict the shear behavior of the composite steel plate shear wall systems (CSPSWs). In the second part, several models of one-story ...

this study contains the identification of modal dynamic properties of a 3-story large-scale steel test frame structure through shaking table measurements. shaking table test is carried out to estimate the modal properties of the test frame such as natural frequencies, damping ratios and mode shapes. among many different model structures, arx (auto recursive exogenous) model structure is used fo...

Abstract: A finite element model is verified accurate enough to simulate the static test of one reinforced-concrete frame with specially shaped columns subjected to the loss of a ground corner column. As the frame sustained loads primarily depending on the beam resisting mechanism in the test, four related parameters, namely the height of beam section, rebar ratio of beam, rebar ratio of slab a...

This study is devoted to seismic collapse safety analysis of performance based optimally seismic designed steel chevron braced frame structures. An efficient meta-heuristic algorithm namely, center of mass optimization is utilized to achieve the seismic optimization process. The seismic collapse performance of the optimally designed steel chevron braced frames is assessed by performing incremen...

Recent investigations have shown that the influences of Soil-Structure Interaction (SSI) may be detrimental to the seismic response of structure, and hence neglecting this phenomenon in analysis and design may lead to an un-conservative design. The objective of this paper is to quantify the effects of nonlinear soil-structure interaction on the seismic response of a low-rise special moment fram...

This paper is concerned with the determination of optimal sensor locations for structural modal identification in a strap-braced cold formed steel frame based on an improved genetic algorithm (IGA). Six different optimal sensor placement performance indices have been taken as the fitness functions two based on modal assurance criterion (MAC), two based on maximization of the determinant of a Fi...