The purpose of this research was to experimentally characterize the flexural and tensile characteristics of fiber-reinforced Very High-Strength Concrete (VHSC) panels. The panels were made with a unique mix of cementitous materials achieving compressive strength of 26,000 psi (180 MPa) or greater. VHSC panels were reinforced with polypropylene fibers of 1 inch (25.4 mm) in length and Polyvinyl ...

Polymer nanocomposites with engineered electrical properties can be made by tuning the fabrication method, processing conditions and filler’s geometric and physical properties. This work focuses on investigating the effect of filler’s geometry (aspect ratio and shape), intrinsic electrical conductivity, alignment and dispersion within the polymer, and polymer crystallinity, on the percolation t...

This study presents an application of neural networks (NN) for the prediction of Marshall test results for polypropylene (PP) modified asphalt mixtures. PP fibers are used to modify the bituminous binder in order to improve the physical and mechanical properties of the resulting asphaltic mixture. Marshall stability and flow tests were carried out on specimens fabricated with different type of ...

This study focused on the contribution of micromechanical parameters on the macro-mechanical response of short fiber composites, namely polypropylene matrix reinforced by glass fibers. In the framework of this paper, an attention has been given to the glass fibers length, as micromechanical parameter influences the overall macroscopic material’s behavior. Three dimensional numerical models were...

Fiber reinforced concretes (FRCs) exhibit property improvement caused by the fibers. By using gamma radiation we have further improved mechanical properties of hydraulic concretes elaborated with Portland cement, water, silica sand, marble and polypropylene (PP) fibers. Compression strength, compression modulus, impact strength and dynamic elastic modulus were determined. Impact fatigue testing...

Worldwide cultivation of corn is expanding, due in part to the increasing production of bioethanol. In consequence, huge amounts of corn stalks residues are been produced. Instead of incineration, we transformed the corn stalks into a semichemical pulp and successfully applied it as reinforcement in polypropylene composites. PP composites reinforced with 40% wt corn stalk single fibers were pre...

blown bitumen (110/10) was mixed with heavy vacuum slops (h.v.s), 60/70 penetration grade bitumen and recycled isotactic polypropylene (ipp) at different levels. the resulting resins were used to impregnate non-woven poly(ethylene terephthalate) fibers to form composites. the modulus and penetration grade of the resulting bituminous resins were determined. it was found that these bituminous res...

In the extended use of concrete in military applications, runway pavements and infrastructures, is subjected to heavy impact loads that vary both velocity intensity. The addition fibers high performance (HPC) can overcome its shortcomings such as brittleness, shrinkage less resistance also improve ductile behavior energy absorption capacity. this study, development on strengthening HPC using st...

Despite being strong under compression, concrete is rather weak when subjected to tensile stress. Concrete has been reinforced with a variety of materials over time in order resist stresses. Among various types fibers, polypropylene fiber, which available range sizes, used strengthen concrete. The fiber also increases the concrete’s toughness, durability, and low permeability. Polypropylene fib...

We describe the formation of amphiphilic polymeric assemblies via a three-step functionalization process applied to polypropylene (PP) nonwovens and to reference hydrophobic self-assembled n-octadecyltrichlorosilane (ODTS) monolayer surfaces. In the first step, denatured proteins (lysozyme or fibrinogen) are adsorbed onto the hydrophobic PP or the ODTS surfaces, followed by cross-linking with g...