Jute fiber/polyethylene biocomposites were prepared using a hot press molding technique. The effects of maleic anhydride, clay, and silica on the physical, mechanical, and thermal properties of jute fiber-reinforced polyethylene (PE) biocomposites with different fiber loadings (5, 10, 15, and 20 wt.%) were investigated. The biocomposites were characterized by Fourier transform infrared spectros...

A new in situ Scanning Electron Microscope-Focused Ion Beam-based method to study porous carbon electrodes involving Pt filling of pores from gaseous precursors has been demonstrated to show drastically improved image contrast between the carbon and porous phases when compared with the Si-resin vacuum-impregnation method. Whereas, the latter method offered up to 20% contrast, the new method off...

Nitrogen-rich porous carbons (NPCs) were synthesized from 1,5-dihydroxynaphthalene, urea, and formaldehyde based on benzoxazine chemistry by a soft-templating method with KOH chemical activation. They possess high surface areas of 856.8-1257.8 m(2) g(-1), a large pore volume of 0.15-0.65 cm(3) g(-1), tunable pore structure, high nitrogen content (5.21-5.32 wt%), and high char yields. The amount...

We develop and analyze a novel, quasi-static, pore-scale approach for modeling drainage in a porous medium system. The approach uses: (1) a synthetic, non-overlapping packing of a set of spheres, (2) a discrete representation of the sphere packing, and (3) concepts from pore morphology and local pore-scale physics to simulate the drainage process. The grain-size distribution and porosity of two...

in this work, sio2 –zro2 mixed oxides was prepared by the polymeric sol–gel route. the characterization of pore structure, which determines the permeation process of membrane, is of great importance. so far, most investigations have focused on such pore structure as specific surface area and pore size distribution, but the surface fractal, the important parameter reflecting the roughness of por...

Several methodologies published in the literature can be used to construct realistic pore networks for simple rocks, whereas in complex pore geometry formations, as formed in tight reservoirs, such a construction still remains a challenge. A basic understanding of pore structure and topology is essential to overcome the challenges associated with the pore scale modeling of tight porous media. A...

This work is focused on synthesis of SiO2- CNT hybrides via sol-gel method. Homogeneous distribution of carbon nanotubes within silicon matrix was obtained by mixing the functionalized carbon nanotube (CNTCOOH) with active silicic acid followed by titration to the solution of sodium silicate (Na2SiO3) under the average temperature condition of 80?C. Different ratios of multi-walled carbon nanot...

We investigate the gas flow behavior of unidirectional porous ceramics processed by ice-templating. The pore volume ranged between 54% and 72% and pore size between 2.9 [Formula: see text]m and 19.1 [Formula: see text]m. The maximum permeability ([Formula: see text] [Formula: see text] m[Formula: see text]) was measured in samples with the highest total pore volume (72%) and pore size (19.1 [Fo...

Physical properties affecting transport processes inside the gas diffusion layer (GDL) in fuel cells mainly depend on the microscopic structure of its pore space. The presented characterization of the pore space is based on geometric 3D graphs, representing the complex microscopic structure. This description of the open volume contains the essential information on the geometrical structure of t...

Nuclear magnetic resonance (NMR) relaxometry tests, carried out on partially saturated porous media, convey information on the distribution of fluids within the pore space. Proper interpretation of this information requires a means to isolate the effects of pore structure (pore and throat shape and size distributions, spatial correlations, etc.) wettability and saturation history. A pore networ...