OBJECTIVE To compare the wear resistance and surface roughness of nanofiller-containing composites and microhybrid composites after simulated wear. METHODS Five microhybrid composites and five nanofiller-containing resin composites were included in the study. Six cylindrical specimens with a diameter of 10 mm and a thickness of 6 mm for each material were prepared. The volume loss, vertical l...

Organic/inorganic composite particles with a core–shell structure exhibit potential applications in chemical mechanical polishing/planarization (CMP) for mechanically challenging materials (copper and low-k dielectrics etc.). In this work, the spherical composites comprised of polystyrene (PS) cores and mesoporous silica (mSiO2) shells were synthesized through a self-assembly of cetyltrimethyla...

Vapor grown carbon fiber reinforced pure aluminum matrix composites were fabricated by the hot-pressing method below the melting temperature of pure aluminum. The surface structures of the vapor grown carbon fibers and the interfacial structures between the fibers and the matrix in the composite were observed. The precipitation mechanism of crystalline aluminum carbide was also investigated. An...

Hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. SEVA/HAP composite content HAP filler with difference particle sizes were designed. Mechanical tests like tensile modulus, UTS, strain at break and biodegradation were investigated. Results illustrated much increase tensile modulus of composites content HAP nano powders ratio to micro powders. Also UTS analysis ...

in this study, ultrafine grained 2024 al alloy based b4c particles reinforced composite was produced by mechanical milling and hot extrusion. mechanical milling was used to synthesize the nanostructured al2024 in attrition mill under argon atmosphere up to 50h. a similar process was used to produce al2024-5%wt. b4c composite powder. to produce trimodal composites, milled powders were combined w...

Polypropylene (PP) has been one of the most widely used polymers due to the versatility and cost benefits obtained with this material. In this work, composites of PP modified with nanostructured ZSM-5 zeolite were prepared and their thermal and mechanical properties were evaluated. Zeolites were synthetized by hydrothermal method and the crystallization time was modified to evaluate the effect ...

Averaged face composites, which represent the central tendency of a familiar population of faces, are attractive. If this prototypicality contributes to their appeal, then averaged composites should be more attractive when their component faces come from a familiar, own-race population than when they come from a less familiar, other-race population. We compared the attractiveness of own-race co...

in this research, water and steam absorption behavior and also effect of maleic anhydride polypropylene (mapp) on these behaviors in wood fiber-polypropylene composite were compared. for this purpose, the composites were manufactured from 60% fibers and 40% polypropylene in presence and absence of ma. the oven dried samples with dimensions of 2.5×2.5×1 cm were immersed in distilled water and ex...

polyvinyl ester green composites were synthesized with walnut shell powder (wsp) by in-situ polymerization technique. the green composites have been evaluated for mechanical properties such as tensile strength, tensile modulus and hardness. sliding wear loss, specific wear rate and coefficient of friction were investigated by using computerized pin-on–disc machine at normal applied loads of 20,...