A mathematical model of Peristaltic pumping of a particle-fluid suspension in a circular tube with an inserted catheter has been developed. The coupled differential equations for both the fluid and the particle phases have been solved and the expression for the flow rate, pressure drop, friction forces at the tube and the catheter wall have been derived. It is found that the pressure drop incre...

Due to the dependence of boiling heat transfer rate on heat flux, saturation pressure, mass flux and refrigerant quality, efforts made to increase heat transfer rate often cause further drop in refrigerant saturation pressure. In this study, entropy generation mechanisms associated with two-phase flow in smooth evaporator tube subject to constant surface heat flux are investigated. Refrigerant ...

Increased rate of heat dissipation from electronic chips was explored by the application of flow boiling in mini-channel (D = 2.54 mm) and micro-channel (D — 510 \x,m) heat sinks with special emphasis on reducing pressure drop and coolant flow rate. A pressure drop model was developed that accounts for the single-phase inlet region, the singleand two-phase heated region, and the two-phase unhea...

We study the elastic deformation of poly(dimethylsiloxane) (PDMS) microchannels under imposed flow rates and the effect of this deformation on the laminar flow profile and pressure distribution within the channels. Deformation is demonstrated to be an important consideration in low aspect ratio (height to width) channels and the effect becomes increasingly pronounced for very shallow channels. ...

We experimentally study the production of micrometer-sized droplets using microfluidic technology and a flow-focusing geometry. Two distinct methods of flow control are compared: (i) control of the flow rates of the two phases and (ii) control of the inlet pressures of the two phases. In each type of experiment, the drop size l, velocity U and production frequency f are measured and compared as...

ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. the solid particles obtained in this process of drying were semi-porous and known as the group d of geldart classification. the variations of moisture content with resident time, the effects of bed height on the pressure drop, and the influence o...

An axisymmetric jet issued from a sharp edged circular convergent nozzle has been studied experimentally in the near field at Reynolds number 5.3x104  to search the saddle shape behavior of mean velocity and the role of mean static pressure in the jet flow. Due to the vena contracta effect the centerline mean velocity of the jet increases about 4.2% of its exit value and corresponding decrease ...

This paper tends to investigate the performance of a separator cyclone used in cement industries in Iran. This investigation was performed using CFD modeling, which is validated by other valid studies. Separator cyclone performance includes of two important parameters as pressure drop and collection ratio. In this presented study, the pressure drop has been considered to assess the performance ...