Digital fringe projection (DFP) profilometry has been widely used to generate threedimensional (3D) surface information. In this work, a novel 3D shape measurement system based on DFP technique is proposed for accurate and quick thin film/rivulet flow measurement. The key concept of the technique is making use of digital image correlation (DIC) algorithm to direct calculate the projected grid p...

in the current study the effect of casimir force and squeezed film damping on the pull-in instability and dynamic behavior of electrostatically actuated nano and micro electromechanical systems is investigated separately. linear elastic membrane theory is used to model the static and dynamic behavior of system for strip, annular and disk geometries. squeezed film damping effect is modeled using...

Two different growth modes of large-area hexagonal boron nitride (h-BN) film, a conventional chemical vapor deposition (CVD) growth mode and a high-pressure CVD growth mode, were compared as a function of the precursor partial pressure. Conventional self-limited CVD growth was obtained below a critical partial pressure of the borazine precursor, whereas a thick h-BN layer (thicker than a critic...

This work proposes a numerical model that incorporates the effect of lubricant inertia on the hydrodynamic pressure distribution, fluid film reaction forces, and the fluid velocity component profiles for finite-length open-ended squeeze film dampers (SFDs). Firstly, the thin film flow equations for the SFD in presence of fluid inertia effects are introduced. Furthermore, a small first-order per...

We have developed a methodology that can be used to determine disjoining pressures (Π) in both stable and unstable wetting films from the spatial and temporal profiles of dynamic wetting films. The results show that wetting films drain initially by the capillary pressure created by the changes in curvature at the air/water interface and subsequently by the disjoining pressure created by surface...

The measurement of dose distributions in clinical brachytherapy, for the purpose of quality control, commissioning or dosimetric audit, is challenging and requires development. Radiochromic film dosimetry with a commercial flatbed scanner may be suitable, but careful methodologies are required to control various sources of uncertainty. Triple-channel dosimetry has recently been utilized in exte...

The thin film pressure balance (TFPB) technique was used to study the kinetics of film thinning in the presence of sodium dodecyl sulfate (SDS) and sodium chloride (NaCl). The experimental results were compared with the predictions of the Reynolds equation. During the initial stages, the film thinning was controlled by the capillary pressure. As the film thickness is reduced, the process is con...

The experimental technique presented in this article is aimed at measuring the absorption of hydrogen or deuterium gas in a thin palladium sample while the system is at low temperature. A result for deuterium is described, consisting in the measurement of the equilibrium loading ratio X (called also D/Pd ratio, atomic), as a function of pressure, on a palladium film 3.6 μm-thick at 150 K. Value...

Radiographic film dosimetry suffers from its energy dependence in proton dosimetry. This study sought to develop a method of measuring proton beams by the film and to evaluate film response to proton beams for the constancy check of depth dose (DD). It also evaluated the film for profile measurements. To achieve this goal, from DDs measured by film and ion chamber (IC), calibration factors (rat...

A fully-coupled thermoelastic model for a fixed pad thrust bearing has been developed. Pressure, film thickness and three-dimensional temperature profiles were obtained by simultaneously solving the Reynolds, film thickness, energy and force balance equations using a combined finite difference and finite element method. The elastic deformation due to the pressure and the thermal distortion due ...