The evolution of zinc oxide nanostructures grown on graphene by alcohol-assisted ultrasonic spray pyrolysis was investigated. The evolution of structures is strongly depended on pyrolysis parameters, i.e., precursor molarity, precursor flow rate, precursor injection/deposition time, and substrate temperature. Field-effect scanning electron microscope analysis, energy dispersive X-ray spectrosco...

The inert and oxidative flash pyrolysis of High Density Poly-Ethylene (HDPE) is studied 6 up to 20 000 K.s, under pressure up to 3.0 MPa and at temperature ranging from 1000 K to 7 1500 K. These conditions are considered to represent those waited onboard a hybrid rocket 8 engine using HDPE as solid fuel. Recycling applications may also find some interest. The 9 pyrolysis products are quantified...

FATE OF MICROPOLLUTANTS DURING PYROLYSIS OF BIOSOLIDS Approximately 250 tons of organic micropollutants, including pharmaceuticals, antimicrobials, and hormones, are discharged to the environment during land application of wastewater biosolids. Reusing wastewater biosolids is vital to the sustainability of wastewater treatment, but current treatment processes do not remove micropollutants from ...

In order to improve pyrolysis chromatographic analysis of materials that release polar functional groups e.g. carboxylic acids, a simple and rapid methylation method based on TDUpyrolysis/GC-MS in the presence of tetramethylammonium hydroxide (TMAH) was developed. Linseed oil was selected as test material because of its high triglyceride content comprising both saturated and unsaturated fatty a...

Chars produced from the pyrolysis of different waste materials have been investigated in terms of their use as a catalyst for the catalytic cracking of biomass pyrolysis gases during the two-stage pyrolysis-gasification of biomass. The chars were produced from the pyrolysis of waste tyres, refused derived fuel and biomass in the form of date stones. The results showed that the hydrocarbon tar y...

The microwave induced pyrolysis of the microalgae Scenedesmus almeriensis and its extraction residue was carried out at 400 and 800°C. The results show that it is possible to obtain a gas fraction with a high content (c.a. 50vol.%) in H2 from both materials, regardless of the pyrolysis temperature. Furthermore, an outstanding syngas production and high gas yields were achieved. The maximum syng...

A study of the possibilities of pyrolysis for recovering wastes of the rope’s industry has been carried out. The pyrolysis of this lignocellulosic residue started at 250 oC, with the main region of decomposition occurring at temperatures between 300 and 350 oC. As the reaction temperature increased, the yields of pyrolyzed gas and oil increased, yielding 22 wt.% of a carbonaceous residue, 50 wt...

This paper presents new findings on ultrasonic spray pyrolysis of zirconium hydroxyl acetate precursor drops whose sizes were precisely measured using laser light diffraction technique. Precursor concentration plays a predominant role in determination of product particle size. At 0.01 wt% precursor concentration, conventional spray pyrolysis at 750°C using precursor drops 5–8 !m in diameter, ge...

The pyrolysis and oxidation kinetics of distillers grains and solubles were determined using thermogravimetric analysis. The starting temperature of pyrolysis and oxidation of distillers grains and solubles increased with the increase of heating rate and initial moisture content. The pyrolysis and oxidation of distillers grains and solubles were completed at 650°C and 850°C, respectively, which...

The aim of the present work was to improve the C:O ratio in biomass by preserving the lignin macrostructure of lignocellulosic feed. The intention of liquid phase pyrolysis is to liquefy biomass and prepare biomass for further upgrading steps like hydrogenation and deoxygenation. Pyrolysis was carried out in a non-aqueous liquid phase heat carrier. The process was carried out in a semi-batch re...