نتایج جستجو برای: rotational speed
تعداد نتایج: 233828 فیلتر نتایج به سال:
Solidification rate of the casting affects greatly on the microstructure, quality as well as the mechanical properties of the casting. In centrifugal castings solidification rate is faster compared to gravity casting but still solidification depends on various process parameters like, die wall temperature, pouring temperature of the molten metal, wall thickness of the die and also rotational sp...
In this article effects of friction stir welding (FSW) tool rotational and traverse speeds were studied on heat generation and temperature distribution in welding zone of AA1100 aluminum alloy and A441 AISI joint. Computational fluid dynamics method was used to simulate the process with commercial CFD Fluent 6.4 package. To enhance the accuracy of simulation in this Study, the welding line that...
This paper presents the design optimization and characterization of a microscale, permanent-magnet (PM) generator, capable of supplying 8 W of dc power to a resistive load at a rotational speed of 305 000 rpm. The generator is a three-phase, axial-flux, PM machine, consisting of a stator with Cu surface windings and a multi-pole SmCo PM rotor. Optimization of the machine geometries has enabled ...
AIM To evaluate the effect of rotational speed and the angle and radius of curvature of root canals on the fracture of two types of nickel-titanium rotary instruments: K3 and ProTaper. METHODOLOGY A total of 240 root canals of extracted human maxillary and mandibular molars were divided into two groups of 120, according to the angle of the canal curvature (group A: <30 degrees, group B: >30 d...
In this study, corrosion behavior of Ti-6Al-4V titanium alloy joint by friction stir welding with a rotational speed of 375 rpm and a travel speed of 100 mm/min was investigated. The welding procedure was carried out under β-transus temperature that was consisted of equiaxed grains in the stir zone. The corrosion behavior of the welded joint was investigated in 3.5% NaCl solution at temperature...
Friction Stir Welding is one of the solid-state processes and today it has been used to join different types of materials. Friction stir welding does not have many problems and limitations due to melting and solidification of weld metal and by controlling its variables, the microstructure and desired mechanical properties can be achieved at the joint. Recently, in most industrial areas, due t...
Friction Stir Welding is one of the solid-state processes and today it has been used to join different types of materials. Friction stir welding does not have many problems and limitations due to melting and solidification of weld metal and by controlling its variables, the microstructure and desired mechanical properties can be achieved at the joint. Recently, in most industrial areas, due t...
Abstract The first step of implanting teeth is to drill a hole in the jaw bone. Excessive temperature produced during drilling is one of the destructive factors for bony tissue. If the temperature generation during surgical drilling exceeds the critical temperature, it could lead to osteonecrosis. This research intends to study drilling parameters such as drilling speed, feed rate, cooling con...
Study on Air Flow Characteristics in Cylinders of a Four-Valve Engine with Different Lifts of Valves
A 1arge-scale tumble rather than swirl would exist in cylinders in the case of two valves’ opening in a fourvalve engine. A strong swirl is generated when one valve is closed, yet the flow capacity is less than that of two valves being opened. In order to change it, different lifts of valves (DLV) present are achieved. In the case of using different lifts of two intake valves, both tumble and s...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید