In order to realize a single-layer corporate-fed slot array, a hollow rectangular coaxial line is adopted as a feeding line. A 2×2-element subarray on a hollow rectangular coaxial line for the corporate-fed array is designed for the 60-GHz band. For the wideband operation, a cavity-backed wide slot is adopted as a radiating element. The 5.7% bandwidth for the reflection less than −20 dB is obta...

Studies of multipactor resonances in coaxial and hollow waveguide via standard particle trajectory and secondary emission numerical simulation techniques are presented. Agreement between simulations and experimentally observed multipactor barriers gives confidence in results of simulation studies of a wedgeshaped hollow waveguide geometry that shows promise of being far less susceptible to mult...

This paper numerically investigated the behavior of rectangular and square concrete-filled double skin steel tubular (CFDST) members under torsion. The finite element model CFDST was established verified against test results for cyclic torque. comparison analysis experiment show that comprehensive can accurately predict torsional members. Parametric analyses by using calibrated were conducted t...

Hollow silica tubes with mesoporous wall structure were synthesized through the sol-gel reactions of tetraethoxysilane and n-octadecyltrimethoxysilane (TEOS/C18-TMS) on the surface of ammonium dl-tartrate crystals. Novel hollow carbon tubes with mesoporous walls and rectangular-shaped channels were fabricated using the silica tubes as templates.

Introduction: When using sliding mechanics for space closure during orthodontic treatment, friction occurs at the bracket-wire interface. The aim of this study was to evaluate the frictional resistance between monocrystalline (ICE) brackets and Stainless Steel, Beta TMA and NiTi wires. Methods: In this experimental study, we used 5 different types of orthodontic wires. Brackets and wires wer...

Plentiful studies are reported on the semi-rigid behavior of joints between open section H shaped beam and column, but researches focusing on the semi-rigid performance of joints between square/rectangular hollow section (SHS/RHS) column-to-H shaped beam is to lag a lot. Most studies shows that when the SHS/RHS column connecting the H beam without internal diaphragm, the joints behavior is semi...

A welded rectangular hollow section (RHS) X-joint exposed to tension loading has three typical fracture-related failure modes: Punching shear (PSF), Brace (BF), and Chord side wall (CSWF). Prediction of these modes by finite element (FE) simulations requires modelling the material damage. An appropriate damage model accurately predicts behaviour fracture zone provides necessary information impr...

This study proposes an improved bonding method for attaching a fiber Bragg grating (FBG) on surface of a structure to measure its dynamic strains. The improved bonding fiber Bragg grating is called IBFBG for short in this study. The bonding method provides the chance to let the IBFBG and resistance strain gauge measure the longitudinal strain at the same point. This study use two steel cantilev...

In this paper torsion of hollow Poroelastic shaft with Elliptical section is developed. Using the boundary equation scheme. It looks for a stress function where satisfied Poisson equation and vanishes on boundary. It also analyzed stress function and warping displacement for the hollow elliptical section in Poroelastic shaft. At the end, the result of elastic and poroelastic shaft in warping di...