environmental pollutions are in considerable attention in steel industries in iran, where mostly are located around isfahan. therefore, an investigation was done mainly on the industrial pollution and waste related to the isfahan steel complex. a plant was installed to collect the uncontrolled fumes, gases and particulates from blast furnace number ii during tapping. this plant collects about 2...

Vanadium extraction methods were developed for iron-vanadium-phosphorus (FeV-P) melts derived from processing of V-bearing titanomagnetites and steel slags. Studies on phase relationships of V slags were carried out to provide important understanding of the extraction processes. Phase relationship in vanadiferous slag was investigated experimentally at 1573K, 1673K and 1773K, for the compositio...

in this study, the blast furnace slag was used as absorbing bed and then, its ionic adsorption was studied. for this reason, various experimental parameters such as ph, contact time and the primary ion concentration were investigated. the remaining concentrations of ions such as; mn2+ and fe2+ in water were measured by atomic adsorption spectroscopy. the chemical and phase composition of slag, ...

In this study, the blast furnace slag was used as absorbing bed and then, its ionic adsorption was studied. For this reason, various experimental parameters such as pH, contact time and the primary ion concentration were investigated. The remaining concentrations of ions such as; Mn2+ and Fe2+ in water were measured by atomic adsorption spectroscopy. The chemical and p...

According to the report of the United Nations, it is said that two-third of world population would be influenced by water shortage before 2050. To use fresh water effectively, the usage of seawater in concrete industry seems imperative. However, the usage of seawater as concrete material is prohibited in almost all the standards or specifications around the world. In this article, the usage of ...

Department of Applied Sciences & Humanities, Moradabad Institute of Technology, Ram Ganga Vihar Phase – 2, Moradabad-244001 Abstract The removal of two heavy metals Cu and Zn from their aqueous solution, using steel industry slag as an adsorbent was studied as slag consist of calcium oxide, aluminum oxide, magnesium oxide etc. The research is a bench scale experimental type and analysis have pe...

Refractories, materials that can withstand high temperatures, play an important role in the iron and steel sector which alone accounts for ~70% of total refractories pro‐ duced. In this chapter, detailed wettability and interfacial phenomena investiga‐ tions on alumina-carbon and zirconia-carbon refractories at steelmaking temperatures. The wettability between refractory substrates and molten i...

Steelmaking slag of Mobarakeh Steel Company (MSC) has a high iron content which makes it unsuitable for conventional slag recovery; as in cement industries. On the other hand, EAF slag in this company is almost free of zinc because of using more than 90 percent DRI in the charge. Therefore, removal or recovery of iron from the slag can be a suitable solution to slag recovery in this company. In...

In the present study, M2 high speed steels were fabricated by using electro-slag rapid remelting process. Carbide structure was analysed and the fracture toughness and hardness were also measured after austenitization treatment at 1190 and 1210C followed by tempering treatment at 535C for billets with various diameters from 16 to 60 mm. Electro-slag rapid remelting (ESRR) process is an advanced...

Abstract: Further technology improvements to complex mature processes, such as the continuous casting of steel, require a combination of careful laboratory experiments, plant trials on the commercial process, and advanced computational models. As computer power increases, computational models are able to contribute more to the understanding, design, and control of these complex processes. Fluid...