A carbon nanotube-enhanced SiC (CNT-SiC) coating was deposited on C/C composites to improve the oxidation resistance of C/C. The CNT-SiC coating was prepared by direct growth of CNTs on C/C surface at 700oC followed by deposition of SiC using chemical vapor deposition at 1150oC for 1 hour. SiC was deposited on the CNTs as well as the interface between CNTs and C/C, making CNTs strongly rooted o...

In this study, a comprehensive effect of particle loading and optimised process parameter on the developed zinc electrolyte was presented. The depositions were performed between 10-30 min at a stirring rate of 200 rpm at room temperature of 30 °C. The effect of coating difference on the properties and interfacial surface was acquired, at a voltage interval between 0.6 and 1.0 V for the coating ...

Wear of the surface is the major problem of all materials. This wear can be of many types and there can be several methods of reducing wear. Coating on the surface of material is one of them. On M.S substrate, thermal spray coating is done using Detonation spray gun and coating powders used is a mixture of oxides (Al2O3-13TiO2). The thermal-sprayed coatings are characterized by SEM, EDS analyse...

HVOF-sprayed CoNiCrAlYSi coatings were tested at 900 °C in a hot corrosion environment containing sodium-potassium sulphates. The HVOF spraying caused the typical splat-on-splat structure. The results after the hot corrosion testing showed that the corrosion preferentially occurred at the coating surface and the splat boundaries. The oxidation along the splat boundaries can isolate the splat fr...

A new nondestructive technique, confocal scanning laser microscopy (CSLM), is described which is used to characterize the topography and morphology of polymer coatings. The topography of the coating can be determined even when the coating is completely opaque. When the coating is not completely opaque, CSLM has the distinct advantage of also being able to distinguish between the coating surface...

poly (lactide-co-glycolide)/bioactive glass/hydroxyapatite (pbgha) and poly (lactide-co-glycolide)/ bioactive glass (pbg) nanocomposite coatings with bone. materials and methods: sol-gel derived 58s bioactive glass nanoparticles, 50/50 wt% poly (lactic acid)/poly (glycolic acid) and hydroxyapatite nanoparticles were used to prepare the coatings. the nanocomposite coatings were characterized by ...

Rough surfaced implants have been reported to favor early bone healing than smooth surfaced implants. Among various methods introduced to roughen the implant surface, coating with calcium phosphate(CaP) is one of them. The purpose of this study was to evaluate the bone healing response of anodized implants with two different coating thickness of CaP(200 nm and 500 nm) deposited by ion beam assi...

D. Niblett, S. C. Porter, I. Gabbott, G. Reynolds, T. Morgan, K. Karan, J. Greenamoyer, R. Hach University of Manchester, Ashland Specialty Ingredients, AstraZeneca Purpose Aqueous film coating still remains a complex process in which the process parameters selected can have a major impact on ultimate product quality. In this study, a wide range of processing parameters was performed in order t...

The purpose of this research was to study the aqueous-based film coating of tablets utilizing a laboratoryscale side-vented perforated pan-coating apparatus. The process parameters of potential importance with respect to the final film quality were evaluated by using trial and error method. Tablets were evaluated for coating uniformity (mg), coating process efficiency (%), surface roughness, an...

The aim of the present work was to study the effect of various process parameters on an aqueous-based film coating process of tablets performed in a side-vented perforated pan-coating apparatus. Results of preliminary trials indicate that spray rate, inlet air temperature, percentage solid content, atomizing air pressure and speed of rotation affected characteristics of coating. A 3 full factor...