The composition dependence of field induced anisotropy KU of field annealed soft ferromagnetic Co1−xFex 89Zr7B4 and Co1−xFex 88Zr7B4Cu1 amorphous and amorphous/nanocrystalline “nanocomposite” melt spun ribbons is investigated. With the exception of the highest Co-containing alloys x 0.10 , the observations are discussed in terms of a superposition of directional pair ordering of Fe,Co atoms and...

Recently, the industry has seen an increase in the number of Pb-free solder alloy choices beyond the common neareutectic Sn-Ag-Cu (SAC) alloys. New wave solder alloys have been developed with the intent of addressing concerns with copper dissolution, barrel fill, wave solder defects, and the high cost of alloys containing significant amounts of silver. Concerns regarding the poor drop/shock per...

INTRODUCTION Base metals have a wide use in casting methods. Sometimes they are reused in laboratories which may have an adverse effect on the restoration marginal integrity. This study aimed to investigate the effect of recasting of alloys on marginal integrity of restorations. MATERIALS AND METHODS Models with two types of finishing lines shoulder bevel 45° and shoulder 135° were produced a...

Microstructure, precipitation hardening response, and mechanical and physical properties of Cu-Cr-Ag alloy and Cu-Cr-Ag-Ce alloy have been investigated using transmission electron microscopy, scanning electron microscope, optical microscope, electrical conductivity analysis, and tensile test. The influence of element Ce on the matrix refinement, impurity removal, and precipitation in the Cu-Cr-...

Nine 35% Ag-30% Pd-20% Au-15% Cu alloys containing 2, 4 and 6 mass% of Sn, Ga or In as an additive metal were experimentally prepared to investigate the effects of different additives and their content on the physical and mechanical properties as well as the bond with a ultra-low fusing ceramic. Both the different additives and their content or either of these two factors significantly influenc...

Adhesion of 4-META to Au-In alloy was improved by adding In equivalent to .15% of Au content. On the basis of the results of Au-In alloys analyzed by XPS, the present study investigated the reason why adhesion of the Au-In alloy was improved. The O 1s spectrum could be separated into three oxygen chemical states, In2O3, chemisorbed H2O, and physisorbed H2O. The amount of chemisorbed H2O decreas...

The present work is aimed to evaluate the effects of a surface modification process on the biocompatibility of three vanadium-free titanium alloys with biomedical applications interest. Chemical composition of alloys investigated, in weight %, were Ti-7Nb-6Al, Ti-13Nb-13Zr, and Ti-15Zr-4Nb. An easy and economic method intended to improve the biocompatibiblity of these materials consists in a si...

The effects of dissolved-oxygen concentration and fluoride concentration on the corrosion behaviors of commercial pure titanium, Ti-6Al-4V and Ti-6Al-7Nb alloys and experimentally produced Ti-0.2Pd and Ti-0.5Pt alloys were examined using the corrosion potential measurements. The amount of dissolved Ti was analyzed by inductively coupled plasma mass spectroscopy. A decrease in the dissolved-oxyg...