In this investigation, Ti/TiN nanolayer and TiN single layer coatings were coated on substrate of AISI 316L stainless steel by applying physical vapor deposition (PVD) using the type of cathodic arc evaporation (CAE). The evaluation of microstructure were carried out using x-ray diffraction (XRD), nanoindentation, atomic force microscopy (AFM) as well as scanning electron microscopy (SEM). Pola...

This quasi-experimental study examined the effects of input-based, meaning-based output (MO) and traditional instruction (TI) on EFL learners’ grammar learning. To this end, 120 junior high school students were selected from 4 intact classes. Each class was assigned to an instructional condition, that is, textual enhancement (TE), input flood (IF), MO, and TI. Before the treatment, a multiple-c...

In this investigation PVD Ti-Cr)N coatings were deposited on hardened and tempered tool steel substrates using reactive arc evaporation. Physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and modulus young and coefficient friction were evaluated. Phase compositions were studies by X-ray diffraction method. The surface microstructure and morp...

The PVD techniques range over a wide variety of applications from decorative, to high temperature superconducting films. The thickness of the deposits can vary from angstroms to millimeters. A very large number of inorganic materials—metals, alloys, compounds, and mixtures—as well as some organic materials can be deposited using Physical vapour Deposition (PVD) technologies. Traditionally, the ...

OBJECTIVES To evaluate modifications in root canal morphology following instrumentation with orifice openers using Computerized Tomography (CT). STUDY DESIGN Experimental in vitro study. A preoperative CT was performed on 49 molars to measure the root canal cross-sections. After preparing the canals with 6 different nickel-titanium (Ni-Ti) rotary system orifice opener type instruments and Gat...

Steel containing 0.03% carbon, 1.35% copper and 0.84% nickel had yield strength in the 540-625 MPa (78-90 Ksi) range depending on thickness, ultimate tensile strength in the 625-690 MPa (90100 Ksi) range, and 25-30% elongation when air cooled after hot rolling. No brittle heat-affected zone was formed during manual or automatic submerged arc welding without pre-heating or postheating. The fract...

Copper has been investigated as a potential interlayer material for diffusion bonds between beryllium and Reduced Activation Ferritic/Martensitic (RAFM) steel. Utilizing Hot Isostatic Pressing (HIP), copper was directly bonded to a RAFM steel, F82H, at 650 C, 700 C, 750 C, 800 C and 850 C, under 103 MPa for 2 h. Interdiffusion across the bonded interface was limited to 1 lm or less, even at the...