A manganese immobilization technology in a fluidized-bed reactor (FBR) was developed by using a waste iron oxide (i.e., BT-3) as catalyst which is a by-product from the fluidized-bed Fenton reaction (FBR-Fenton). It was found that BT-3 could easily reduce potassium permanganate (KMnO4) to MnO2. Furthermore, MnO2 could accumulate on the surface of BT-3 catalyst to form a new Fe-Mn oxide. Laborat...

Practically all of life’s molecular processes, from chemical synthesis to replication, involve enzymes that carry out their functions through the catalysis of metastable fuels into waste products. Catalytic control of reaction rates will prove to be as useful and ubiquitous in DNA nanotechnology as it is in biology. Here we present experimental results on the control of the decay rates of a met...

Pyrolysis of kitchen based vegetable waste (KVW) was studied in a designed packed bed reactor. The effect of process parameters like temperature, time and catalyst on bio-gas yield and its composition was studied. The total bio-gas yield was found to be maximum with non-catalysed operation (260ml/g) at 1073K (180min). Higher hydrogen (H(2)) yield with non-catalysed operation (32.68%) was observ...

Oils with high content of free fatty acid (FFA) can be treated by acid esterification where an alcohol reacts with the given oil in the presence of acid catalyst. The investigated parameters include methanol to oil ratio, temperature and amount of catalyst. The optimum conditions for acid esterification which could reduce FFA content in the feedstock to less than 1.88% (acid value 3.76 mg KOH/g...

Poly(ethylene terephthalate) (PET) powder was hydrolyzed at atmospheric pressure in 5-10 wt% aqueous NaOH at 95°C for 100 min using some phase transfer catalysts (PTC) with an intention to recover the starting monomers from the waste PET. The intent behind attempting new PTC was to carry out the reaction at milder conditions than those reported in the literature. One of the monomers, terephthal...

In this study we have investigated the possibility of processing waste rubber gloves using pyrolysis. Y-zeolite catalyst was employed to upgrade the pyrolysis products to give higher yields of valuable aromatic compounds such as toluene and xylenes. The composition of the pyrolysis products was determined using gas chromatography with linked mass spectrometry (GC-MS), gas chromatograph equipped...

The use of a waste-based secondary fuel in clinker kilns is a widely used practice. Nevertheless, specific studies to understand the destruction mechanism of exhaust pollutants in cement raw material (CRM) are limited. This work focuses on the possible catalytic effect of the interaction of exhaust gases from the combustion of sewage sludge with various solids beds, including CRM. Catalyst base...

Waste sardine oil, a byproduct of fish industry, was employed as a low cost feedstock for biodiesel production. It has relatively high free fatty acid (FFA) content (32 mg KOH/g of oil). Lipase enzyme immobilized on activated carbon was used as the catalyst for the transesterification reaction. Process variables viz. reaction temperature, water content and oil to methanol molar ratio were optim...

Chars produced from the pyrolysis of different waste materials have been investigated in terms of their use as a catalyst for the catalytic cracking of biomass pyrolysis gases during the two-stage pyrolysis-gasification of biomass. The chars were produced from the pyrolysis of waste tyres, refused derived fuel and biomass in the form of date stones. The results showed that the hydrocarbon tar y...