This revision work focuses on the recent advances in separation of microcontaminants from urban wastewaters, using ultrafiltration and Nanofiltration membranes. Conventional systems show advantages such as low pressure fouling, competitive energetic- maintenance costs compared to reverse osmosis, higher rejection rates organic membrane distillation. However, these strongly depend temperature, f...

Activated carbons are extremely versatile adsorbents for major industrial significance, especially for metal ions recovery from wastewaters. In this study, the activated carbon prepared from the hard shell of apricot stones, an agricultural solid, which was used for the gold recovery from gold-plating wastewater is investigated. Activated carbon was produced by chemical activation with phosphor...

Synthetic oily wastewaters were prepared from metal working fluids (MWF). Electrocoagulation experiments were performed under constant voltage application. The current, conductivity, pH, dissolved oxygen concentration and temperature were recorded on line at every 5 seconds during the experiments. Effects of applied voltage differences, electrode materials and distance between electrodes on rem...

1 Overview Electricity generation from coal, natural gas, oil and nuclear sources involves the use of large volumes of process water. Two significant water-related issues confront the energy industry. The first involves biofouling of process surfaces and other power plant structures, leading to reduced energy efficiency and increased operational costs. A second challenge involves the accumulati...

Anammox (anaerobic ammonium oxidation) is an environment-friendly and cost-efficient nitrogen-removal process currently applied to high-ammonium-loaded wastewaters such as anaerobic digester effluents. In these wastewaters, dissolved methane is also present and should be removed to prevent greenhouse gas emissions into the environment. Potentially, another recently discovered microbial pathway,...

Microorganisms dead or alive are successfully exploited for bioremediation of xenobiotics by biosorption. Textile effluents are among the most difficult-to-treat wastewaters, due to their considerable amount of recalcitrant and toxic substances. Fungal biosorption is viewed as a valuable additional treatment for removing pollutants from textile wastewaters. The overall economics of the biosorpt...

*Corresponding author Email: [email protected] In this work, the treatment of organics present in printing ink wastewaters such as dyes (methylene blue and rhodamine B), surfactants (sodium dodecylbenzene sulfonate), and solvents (ethylene glycol), as well as actual printing ink wastewaters by advanced oxidation processes, namely conductive diamond electrochemical oxidation (CDEO), Fenton...

In Ethiopia, the most common method of disposal of waste water is by land spreading. This treatment method has numerous problems, namely high labor requirements and the potential for eutrophication of surface and ground waters. Constructed wetlands are commonly used for treatment of secondary municipal wastewaters and they have been gaining popularity for treatment of agricultural wastewaters i...

Various culture parameters were optimised for laccase synthesis by Trametes pubescens MB89, including pH, carbon source, nitrogen source, lignocellulosic supplements, and reported inducers. Glucose, in conjunction with a complex nitrogen source at pH 5.0, resulted in the highest laccase yield. Adding ethanol, copper, or 2,5-xylidine prior to inoculation further improved laccase concentrations. ...

Wastewaters from textile industry contain various pollutants including a high content of organic matter, surfactants, additives and dyes. Dyes have obtained notoriety as hazardous substances, because most of them are toxic and considered to be resistant to biodegradation. Recently, advanced oxidation processes (AOP) have received considerable attention because it is possible to degrade organic ...