Experimental investigation of heat transfer during pool boiling of two nanofluids, i.e., water-Al2O3 and water-Cu has been carried out. Nanoparticles were tested at the concentration of 0.01%, 0.1%, and 1% by weight. The horizontal smooth copper and stainless steel tubes having 10 mm OD and 0.6 mm wall thickness formed test heater. The experiments have been performed to establish the influence ...

One way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. In the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. In this work, the performance of water / iron oxide nanofluid in a double...

The single-phase flow and thermal performance of a double pipe heat exchanger are examined by experimental methods. The working fluid is water at atmospheric pressure. Temperature measurements at the inlet and outlet of the two streams and also at an intermediate point half way between the inlet and outlet is made, using copper-constantan thermocouple wires. Mass flow rates for each stream are ...

in this paper, the effects of adding nanoparticles including tio2 to a fluid media for purpose of free convection heat transfer improvement were analyzed. the free convection was assumed to be in laminar flow regime and the solutions and calculations were all done by the integral method. water, as a newtonian fluid, was considered the base fluid (water) and all the thermo physical properties of...

(1) The object of a bomb calorimeter is to absorb the heat released from an accurately measured amount of chemical reaction and convert it into a temperature rise which can be measured with corresponding accuracy. Questions associated with the chemical reaction are often difficult, but will not be discussed here. This paper is concerned with the purely physical questions associated with the tem...

In the present research, the laminar forced convective heat transfer and fluid flow characteristics for Al2O3-water nanofluid flowing in different bend (i.e., 180o and 90o) pipes have been investigated numerically in a three-dimensional computational domain using the finite volume technique. The effects of different pertinent parameters, such as the Reynolds number of the duct, volume fraction ...

One way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. In the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. In this work, the performance of water / iron oxide nanofluid in a double...

In this study, the convective heat transfer and pressure drop in laminar flow of Al2O3/water and CuO/water nanofluids through square and triangular cross-sectional ducts have been numerically investigated using new technique. It has been assumed that there is constant heat flux boundary condition at walls. In addition, to include the presence of nanoparticles, the dispersion model has been used...

different control strategies of bed temperature and moisture were investigated using various inlet air temperatures and air fluxes in both the ordinary packed bed bioreactor (without cooling water in the jacket) and the bioreactor with cooling water in jacket. the experiments were carried out within a 1-l solid-state packed bed bioreactor in which aspergillus niger was cultivated on wheat bran....