Plasma sprayed zirconia deposits have been employed in wide applications for thermal protection. Recently, the use of nanostructural surface represents an alternative for improving the performance of these coatings. The present paper reviewed the works in this field at our research group, including synthesis of nanostructural ZrO2 powders, influence of spraying parameters on microstructure and ...

Various nanocomposites of TiO2, ZnO and ZrO2 decorated single wall Carbon nanotubes (SWNTs) were fabricated by facile and template free continuous ultrasonication/stirring of virgin metal oxide nanopowders and SWNTs in ethanol under UV-light illumination. The TEM micrographs showed that nanoparticles (NPs) were uniformly dispersed and bonded on the surface of SWNTs. The results of XRD as well a...

ZrO2-based resistive switching memory has attracted much attention according to its possible application in the next-generation nonvolatile memory. The Al/ZrO2/Pt resistive switching memory with bipolar resistive switching behavior is revealed in this work. The thickness of the ZrO2 film is only 20 nm. The device yield improved by the non-lattice oxygen existing in the ZrO2 film deposited at ro...

A novel hydrothermal zirconium oxide (ZrO2) ion exchange material was successfully synthesized by hydrothermal technique. The material has been characterized using different tools such as thermal analysis (DTA-TGA), FT-IR and X-ray diffraction studies. The results show that the prepared ZrO2 is pure and with a unique shape and it belongs to the hexagonal system. Chemical resistively of the mate...

Conventional drying of colloidal materials and gels (including cement) can lead to detrimental effects due to the buildup of internal stresses as water evaporates from the nano/microscopic pores. However, for these gel materials the underlying nanoscopic alterations that are, in part, responsible for macroscopically-measured strain values (especially at low relative humidity) remain a topic of ...

ZrO2 nanoparticles have been investigated in the photodegradation of formic acid under UV irradiation. photocatalysts were prepared using a ‘one-pot’ sol-gel method followed by drying supercritical conditions solvent and calcination at temperatures varying between 400 °C 800 °C. Samples characterized adsorption-desorption isotherms, XRD, Thermal analysis, Raman spectroscopy, HRTEM, DRS, PL XPS....

Alumina toughened zirconia (ATZ) nanoceramics accompanied with high-strength, high-toughness and high-hardness were prepared by in-situ nanoprecipitation from using solid solution micro-powders. The submicron-sized Al2O3 (∼445 nm) ZrO2 (∼361 grains contained low-density precipitated nano-ZrO2 (∼35 nano-Y4Al2O9 (YAM, ∼87 particles, respectively, making high-performance nano-ATZ ceramics ultrafin...

The surface chemical properties of undoped tetragonal ZrO2 and the gas-phase dependence of the tetragonal-to-monoclinic transformation are studied using a tetragonal ZrO2 polymorph synthesized via a sol-gel method from an alkoxide precursor. The obtained phase-pure tetragonal ZrO2 is defective and strongly hydroxylated with pronounced Lewis acidic and Brønsted basic surface sites. Combined in s...

Zirconia was used to support Ru, Ni, and Ru-Ni bimetallic nanoparticles for CO2 methanation. The formation of an alloy detected in Ru K-edge spectra. Ru/ZrO2 exhibited the highest reaction rate (1.35 mol/molmetal.s) with a CH4 selectivity 97.3%. diffuse reflectance infrared fourier transform spectroscopy experiments suggest that formates serve as intermediates converting CO via reverse water–ga...

Binary oxide semiconductors TiO2-ZrO2 and Cu-decorated TiO2-ZrO2 (TiO2-ZrO2-Cu) uniform films were sputtered on polyester (PES). These films were irradiated under low intensity solar simulated light and led to bacterial inactivation in aerobic and anaerobic media as evaluated by CFU-plate counting. But bacterial mineralization was only induced by TiO2-ZrO2-Cu in aerobic media. The highly oxidat...