-In the present work an attempt is made to evaluate the suitability of composite material such as E-Glass/Epoxy and HMCarbon/Epoxy for the purpose of automotive transmission applications. A one-piece composite drive shaft for automobile is designed and analyzed using ANSYS software respectively for E-Glass/ Epoxy and HM-Carbon/Epoxy composites with the objective of minimization of weight of the...

−− A numerical model was developed to study heat transfer process during freezing of biological tumors. Two different cryosurgical systems, Endocare cryoprobe and novel combined cryosurgery and hyperthermia system, were investigated using the multidimensional, finite element method (FED) developed in Ansys (V7.0) by us recently. The tissues were modeled as nonideal materials, the thermophysical...

The fluid/structure interaction (FSI) investigations of stacked chip in encapsulation process of moulded underfill packaging using the two-way Coupling method with ANSYS Fluent and ANSYS Structural solvers are presented. The FSI study is executed with different aspect ratio of stacked chip on the mould filling during the encapsulation process. The simulation results in the FSI study is well val...

A finite element model of cMUTs is constructed using the commercial code ANSYS. The complex load impedance seen by individual cells is compared with the plane wave real impedance seen by a parallel combination of the cells to make a transducer. The result shows the origin and level of crosstalk between array elements, with evidence of coupling through Stoneley and Lamb waves. For reduction of t...

This paper presents a novel way for a structural dynamic simulation analysis on a three-dimensional (3-D) finite element (FE) model of a 6-DOF Manipulator using ANSYS Workbench 13.0 that allows integrated optimization. The load between driving and driven gear is delivered by elastic frictional contact, which leads to some non-liner contact problems, and the contact problems are solved according...

One variety of wheat in the breeding process was chosen to determine the wheat morphological traits and biomechanical properties. ANSYS was used to build the mechanical model of wheat to wind load and the dynamic response of wheat to wind load was simulated. The maximum Von Mises stress is obtained by the powerful calculation function of ANSYS. And the changing stress and displacement of each n...

The study on the mechanical properties of foam copper has become increasingly important, for the potential market in the foam metal. The Kelvin model was supposed to be the suitable model to construct the ideal open-cell, continued and three-dimensional structure. The static tensile behavior on the foam copper was simulated by ANSYS and the effects of the porosity and strain rate on the foam co...

junction temperature; ansys The emergence of high power light emitting diode as a novel electronic based light source is due to its vast advantage in terms of optical efficacy, low power consumption and enhanced life time. However, the performances of the LEDs are dependent on the junction temperature as it is inherited high heat production. Hence, proper evaluation of the junction temperature ...

The formation and disappearance of ice changes will cause the change of its capacitance, we can use this features of air, ice and water has different capacitance under different temperature to measure the ice thickness. The capacitance sensor is designed based on this theory that can measure the ice thickness in the harsh environment more effective. Based on the finite element simulation softwa...

An adhesive is a material used for holding two surfaces together. An adhesive must wet the surfaces, hold fast to the surfaces, develop strength after it has been applied, and remain Stable. In this work we work on aerospace application, for that application we used material as SS304 and used Adhesive as EA-E30HV.We used specimen size as 130*30*1.95mm. We used different overlap length and overl...