The main objective of the work reported here is to assess factors that could affect the outcome of a proposed open flame test for barrier fabrics (BF-open flame test). The BF-open flame test characterizes barrier effectiveness by monitoring the ignition of a flexible polyurethane foam (FPUF) layer placed in contact with the upper side of the barrier fabric, exposed to a burner flame from below....

nowadays, utilization of blended fuel in internal combustion engine is one of main topics in vehicle industries. the synergy effect will be highlighted when the potential of each fuel is employed and the engine performance will improve consequently.  in this research, the laminar flame speed of methane (main component of reference fuel for natural gas) and isooctane (main component of reference...

This paper illustrates the utility of developing compu­ ter models to predict and evaluate performance of com­ plex systems, in this case a dual combustion chamber incinerator of the type normally operated with starved air in the primary chamber, and equipped with a heat recov­ ery boiler. Once the model has been written, it can be used for construction of performance curves and examina­ tion o...

Semitendinosus muscles from low quality, cull cows were trimmed, separated into three fat levels (10, 20, and 30%), treated with 0, 5, 10, 15, or 20 seconds of surface flame application, ground, and formed into patties. Patties were quick frozen (-80 C for 1 hr) and stored at -10 C for 0, 4 or 24 days. Hunter “L” and “b” values increased (P<.01) and Hunter “a” values decreased (P<.01) as flame ...

In this paper the travelling wave solutions in the adiabatic model with two-step chain branching reaction mechanism are investigated both numerically and analytically in the limit of equal diffusivity of reactant, radicals and heat. The properties of these solutions and their stability are investigated in detail. The behaviour of combustion waves are demonstrated to have similarities with the p...

The present work addresses the coupling of a flamelet database that can accurately represent the flame structure in composition space with a low-Mach approximation of the Navier-Stokes equations. An advancement of the CFI combustion model, which is currently based on laminar premixed flamelets, is used for chemistry tabulation. This model can be applied to different combustion regimes from prem...

On a television show, a pre-cooled bare-skinned person (TV host) passed through engulfing kerosene flames. The assumption was that a water film should protect him during 0.74 s flame exposure in an environment of 86 kW/m² heat flux. The TV host got light burn inflammation on the back, arms and legs. The present work studies skin temperatures and burn damage integral of such dangerous flame expo...

The present work addresses unsteady flame dynamics in a lean-premixed swirl-stabilized combustor, with attention focused on the transition of flame structure from a stable to an unstable state. It was found that the inlet temperature and equivalence ratio are the two most important variables determining the stability characteristics of the combustor. A slight increase in the inlet mixture tempe...

A new low-cost optical diagnostic technique, called Cone Beam Tomographic Three Colour Spectrometry (CBT-TCS), has been developed to measure the planar distributions of temperature, soot particle size, and soot volume fraction in a co-flow axi-symmetric laminar diffusion flame. The image of a flame is recorded by a colour camera, and then by using colour interpolation and applying a cone beam t...