The solid particle contamination is a challenge for the cement industries due to the highly dusty environment. The contaminants cause severe wear between moving surfaces and this in turn leads to rapid mechanical failure of the machine elements. The solid particle contaminants get into the lubricant among the metal surfaces due to the environmental conditions. The conditions get more severe in ...

Peat normally has high organic matter content and is generally associated with high compressibility and high magnitude and rates of creep. It may also be associated with poor strength characteristics and a risk of large deformation. The main specifications in the peat nature are the presence of acidic or less commonly alkaline media, combined with a high level of ground water. One of the most c...

The Joint Transportation Research Program serves as a vehicle for INDOT collaboration with higher education institutions and industry in Indiana to facilitate innovation that results in continuous improvement in the planning, design, construction , operation, management and economic efficiency of the Indiana transportation infrastructure. NOTICE The contents of this report reflect the views of ...

Elementary and phase composition as well as micrography of the electric furnace slag were examined. The base of slag is made from phases containing Fe, Mn and Ca. Grains differ in size and shape, they cling together to form bigger or smaller agglomerates, depending on separated fractions. Relative distribution of identified phases in separated fractions is presented and the possibility of phase...

environmental pollutions are in considerable attention in steel industries in iran, where mostly are located around isfahan. therefore, an investigation was done mainly on the industrial pollution and waste related to the isfahan steel complex. a plant was installed to collect the uncontrolled fumes, gases and particulates from blast furnace number ii during tapping. this plant collects about 2...

Inorganic arsenic removal from water using low-cost adsorbents is presented in this paper. Selective removal of As(III) and As(V) from water was performed with natural materials (zeolite, bentonite, sepiolite, pyrolusite and limonite) and industrial by-products (waste filter sand as a water treatment residual and blast furnace slag from steel production); all inexpensive and locally available. ...

A new method has been presented, which leads to a significant improvement of the adsorption ability of blast furnace slag (BFS). An ultra-high pressure water jet mill cavitation disintegrator and a controlled vacuum freeze dryer were used to disintegrate amorphous BFS. Specific surface areas of both BFS and disintegrated slag (BFS-D) were measured using the S method. BFS-D was obtained with an ...

Using wastes as starting raw materials is a common method to reduce the production costs and the environmental pollution problems arising from such wastes. In this study the production and crystallization behavior of an iron rich glass prepared by iron and steel making wastes has been investigated. The raw materials used, were the blast furnace slag, the blast furnace dust, converter slag and s...

Blast-furnace slag is one of the main by-products produced in process blast-furnace ironmaking. Its metallurgical properties have an important impact on smooth operation and long life blast furnaces. In this paper, activity MgO a CaO-SiO2-MgO-Al2O3 quaternary system was measured using reference-slag method at 1773–1873 K. The effects temperature coefficient Mg Sn were discussed. results showed ...