Abstract – Resonant parametric perturbation (RPP) method is an effective non-feedback method for controlling chaos. In this paper, the above method is applied for the current programmed buck-boost dc-dc converter which exhibits chaotic for wide parameter variations. The different possible operating regimes leading to chaotic operation of the current mode controlled buck-boost converter is discu...

A boost converter which employs a flying-capacitor passive lossless snubber to reduce the losses caused by the reverse-recovery characteristic of the boost rectifier is described. The passive snubber consists of a snubber inductor, two snubber rectifiers, and a snubber capacitor. The losses are reduced by inserting a snubber inductor in the series path of the boost switch and the rectifier to c...

Most mobile equipments use battery as power source. The increasing use of low voltage portable devices and growing requirements of functionalities embedded into such devices. Thus an efficient power management technique is needed for longer battery life for them. Given the highly variable nature of batteries systems often require supply voltages to be both higher and lower than the battery. Thi...

The influence of switching frequency on the low-frequency oscillation in the voltage-controlled buck-boost converter is studied in this paper. Firstly, the mathematical model of this system is derived. And then, a glimpse at the influence of switching frequency on the low-frequency oscillation in this system by MATLAB/Simulink is given. The improved averaged model of the system is established, ...

A novel bidirectional DC-DC converter is presented in this paper. The circuit configuration of the proposed converter is very simple. The proposed converter employs a coupled inductor with same winding turns in the primary and secondary sides. In step-up mode, the primary and secondary windings of the coupled inductor are operated in parallel-charge and series-discharge to achieve high step-up ...

The fly back converter has been widely used for multi outputs due to the simple structure and low cost in low-power applications. This paper presents a new multi output converter. It consists of a half-bridge inverter with boost converter in primary side and a fly back rectifier that is integrated with an auxiliary buck converter in secondary side. The boost converter is used to generate high v...

In this paper, a new embedded Z-H (EZ-H) buck-boost converter is proposed. In this topology, two identical dc voltage sources are embedded in a LC network in a series connection with the inductors. The proposed converter eliminates the shoot-through (ST) switching state and there is no need for a front-end diode. Other advantages of the proposed topology are having capability of buck and boost ...

The IDBB converter features just one controlled switch and two inductors and is able to supply a solid-state lamp from the mains providing high power factor and good efficiency. And with a careful design of the converter the filter capacitances can be made small enough so that film capacitors may be used. Thus the converter mean time between failures can be made as high as that of the solid-sta...

A new transformerless buck–boost converterwith simple structure is proposed in this study. Comparedwith the traditional buck–boost converter, the proposedbuck–boost converter’s voltage gain is squared times of theformer’s and its output voltage polarity is positive. Theseadvantages enable it to work in a wider range of positiveoutput. The two power switches of the proposed buck–boost converter ...

Environmental friendly solutions are becoming more prominent than ever as a result of concern regarding the state of our deteriorating planet. This paper presents a new DSP controller based Switching configuration of hybrid Distributed Energy Generators (DER) with a single input DC-DC Buck-Boost converter, based on their availability . This configuration allows the two sources to supply the loa...