The flexural strength and flexural modulus of an experimental metal-resin composite, which used Ag-In alloy particle as the filler, were evaluated. The effect of acid treatment and heat treatment on the Ag-In alloy particle was investigated. The flexural strength of the experimental metal-resin composites ranged from 65.5 MPa to 91.0 MPa. The flexural strength of the metal-resin composite incre...

in this study, attempts were made to recovery the used turbine blades made up of inconel738 by electro slag remelting (esr) method. using an appropriate slag and addition of metallic aluminum, the original composition was maintained and the amount of oxygen, hydrogen and nitrogen remained in the acceptable level. in order to explore the effect of remelting with esr on the microstructure, tensil...

Using low-energy electron microscopy, we measure the diffusion of Pd into bulk Cu at the Cu(100) surface. Interdiffusion is tracked by measuring the dissolution of the Cu(100)-c(2 × 2)-Pd surface alloy during annealing (T>240 °C). The activation barrier for Pd diffusion from the surface alloy into the bulk is determined to be (1.8 ± 0.6) eV. During annealing, we observe the growth of a new laye...

the 17-4ph alloy is a martensitic stainless steel with 3–5 wt% cu, strengthened by the precipitation hardening. due to excellent mechanical properties, corrosion resistance and ease of heat treatment, this alloy has unique applications in nuclear power plants and marine constructions. in this paper, the influence of ageing heat treatment, solution annealing followed by ageing at 480, 550 and 62...

background: dental cobalt base alloys are biocompatible dental materials and have been widely used in dentistry. however, metals are bioinert and may not present bioactivity in human body. bioactivity is the especial ability to interact with human body and make a bonding to soft and hard tissues. the aim of the present research was fabrication and bioactivity evaluation of novel cobalt alloy/ f...

We present here the findings of Alpha’s Alloy Development Program on the next generation of low temperature alloys that can be used in reflow soldering temperatures from 170 to 200C. Approaches in alloy development, test methodologies and results are discussed. The alloy properties targeted for improvements include: Alloy strength, alloy ductility, microstructure stability, improvements in ther...

Authors stressed an importance of low oxygen content of slowly cooled ingots for the homogeneous amorphous half top layers of arc-melted button ingots. The quenching procedure was also not favored to produce amorphous top layers. However authors made a liquid quenching machine to enhance the cooling speed. Photographs Figs.4(b) and 5 are troublesome. Originality as well as scientific significan...

The microstructure and mechanical properties of 7075 wrought aluminum alloy produced by strain induced melt activation (SIMA) route were investigated.Also liquid volume fraction measurement was studied by three procedures. Remelting process was carried out in the range of 560 to 610 °C for 20 min holding. The microstructure in the semi-solid state consists of fine spherical solid grains surroun...