Previous experimental studies have shown that addition of small amounts of oxygen to a hydrocarbon fuel stream can control coking in the anode, while relatively large amounts of oxygen are present in the fuel stream in single-chamber solid oxide fuel cells SOFCs . In order to rationally design an anode for such use, it is important to understand the coupled catalytic oxidation/ reforming chemis...

Nickel nanoparticles (Ni NPs) are quite interesting because they exhibit high catalytic activity, high selectivity and high efficiency in fuel cells [1, 2]. However the coke-formation takes place in these NPs involving chemical reactions. For instance the CO2 reforming of methane gas in the presence of Ni NPs leads to the formation of coke containing predominantly the carbon nanotubes (CNTs) [3...

In this study, the modeling of hydrogen production process in microreactors by methanol-steam reforming reaction is investigated. The catalytic reaction of methanol-steam reforming producing hydrogen is simulated considering a 3D geometry for the microreactor. To calculate diffusion among species, mixture average correlations are compared to Stephan-Maxwell equations. The reactions occurring in...

A small-size gasification unit is improved through process optimization to simulate industrial United Gas Improvement Company gasification. It finds that the reaction temperature has important impacts on semicoke catalyzed methane gas mixture. The addition of water vapor can enhance the catalytic activity of reforming, which is due to the fact that addition of water vapor not only removes carbo...

Catalytic naphtha reforming is one of the most important processes in which, low quality naphtha is converted into high octane motor gasoline. In this study, a mathematical model was developed and was used for investigation the effect of temperature, pressure, hydrogen to hydrocarbon ratio on the octane number, the yield of product and the undesirable phenomena of coke deposition in a semiregen...

The paper presents a proposition of simulation studies of nitrogen oxide catalytic reduction. The method enables estimating the influence of catalytic reactors on ecological properties of engines in static bench tests (e.g., ECE R49, United Nations Economic Commission for Europe [UN/ECE], 2000; Standard No. ISO 8178-4:1996, International Organization for Standardization [ISO], 1996; Merkisz (19...

hydrogen was produced by steam reforming of dimethyl ether (dme) using a physical mixture of commercial hzsm-5 zeolite (for dme hydrolyzing) and cu/zno/al2o3 (for methanol steam reforming) as a catalyst in a fixed bed reactor. the experiments were performed at atmospheric pressure and in a temperature range from 270 to 310 °c. the effects of feed temperature and gas hourly space velocity (ghsv)...

The reactor performance of two novel fluidized bed membrane reactor configurations for hydrogen production with integrated CO2 capture by autothermal reforming of methane (experimentally investigated in Part 1) have been compared using a phenomenological reactor model over a wide range of operating conditions (temperature, pressure, H2O/CH4 ratio and membrane area). It was found that the methan...