It is based on the experiments conducted for study of chromium removal and recovery from chrome tanning waste water of leather industry for chromium removal about 98.5% was achieved at pH 8.0 and at this pH reduction of COD is 61.5 % and percentage for removal of color from the wastewater of leather industry is 99.5% under applying the batch experimental condition. For this purpose, it is carri...

Chromium (VI) is one of the heavy metals in water and wastewater that has the most toxic characteristic. Consequently, it is dangerous for human and environmental health. Various methods are used for removal of the chromium from wastewater, and new methods have been developed in recent years. Recent studies and investigations on the removal of environmental pollution selected methods that were ...

With the building wastes contaminated by chromium in Haibei Chemical Plan in China as objects, we studied the contents of total Cr and Cr (VI) of different sizes, analyzed the effect of 6 different washing agents, discussed the removal mechanisms of 6 different washing agents for Cr in various forms, and finally selected applicable washing agent. As per the results, particle size had little imp...

The release of chromium into water bodies is one of the major concerns of tannery industries. The present work deals with the determination of Chromium removal capacity of powdered biomass of Sargassum wightii (Greville) in synthetically prepared as well as real tannery effluent. The maximum adsorption was obtained after 12 hours of exposure at pH-4, in 8g/L biomass concentration of the seaweed...

We propose a method to enhance the fuel cell efficiency with the simultaneous removal of toxic heavy metal ions. Carbon monoxide (CO), an intermediate of methanol oxidation that is primarily responsible for Pt catalyst deactivation, can be used as an in-situ reducing agent for hexavalent chromium (Cr (VI)) with reactivating the CO-poisoned Pt catalyst. Using electro-oxidation measurements, the ...

This study proposed an oil palm by-product as a low-cost adsorbent for the removal of hexavalent chromium [Cr (VI)] from aqueous solution. Adsorption of Cr (VI) by sulphuric acid and heat-treated oil palm fibre was conducted using batch tests. The influence of pH, contact time, initial chromium concentration and adsorbent dosage on the removal of Cr (VI) from the solutions was investigated. The...

adsorption capacity of cr (vi) onto cousinia eryngioides boiss, activated carbon was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, ph, temperature, agitation speed, absorbent dose and particle size. cr (vi) removal is ph dependent and found to be maximum at ph 2.0. the amounts of cr (vi) adsorbed increased with increase...

This research involved the synthesizing of a reactive polymer, long alkyl quaternized poly(4-vinylpyridine) (PVP), and coating it on the surface of silica gel to produce a granular sorbent to remove Cr(VI) from water. Batch experiments were conducted to determine the kinetics, sorption isotherm, pH effects, and influence of other anions on the chromium adsorption onto the coated silica gel. The...

chromium (cr) is one of the elements presents in crust of the earth. due to its toxicity, chromium is considered as water contaminant that may disturb metabolic activity. in the present study, adsorption of dissolved chromium (vi) onto elaeagnus angustifolia fruit charcoal, jujube fruit charcoal and the standard granular activated carbon (gac) has been investigated and compared. the effect of c...

The removal of chromium(VI) from an aqueous solution using persimmon gel was examined. The amount of chromium(VI) removed was strongly affected by the pH of the solution, with all chromium(VI) being removed at pH 2 or lower. However, in a solution containing, 15 mg dry weight of immobilized persimmon gel, the amount of removed chromium(VI) decreased as the pH increased. A part of chromium(VI) w...