This study investigated the friction between surgical instruments and bone to aid improvements to instrument design. The bases of orthopaedic surgical instruments are usually made of metal, especially stainless steel. Silicone elastomer was chosen as an alternate biocompatible material, which would be compliant on the bone surface when used as the base of an instrument. The coefficient of stati...

This paper reports the correlation between film thickness, nanostructure and DC electrical properties of copper thin films deposited by PVD method on glass substrate. X-ray diffraction (XRD) and atomic force microscopy (AFM) were used for crystallography and morphology investigation, respectively. Resistivity was measured by four point probe instrument, while a Hall effects measurement system w...

A scale-dependent dynamic subgrid model based on Lagrangian time averaging is proposed and tested in large eddy simulations sLESd of high-Reynolds number boundary layer flows over homogeneous and heterogeneous rough surfaces. The model is based on the Lagrangian dynamic Smagorinsky model in which required averages are accumulated in time, following fluid trajectories of the resolved velocity fi...

Study of Aluminum nitride (AlN) thin film deposited on silicon wafer and glass substrates by DC magnetron sputtering technique at different power variation. The X-ray diffraction and Fourier transform infrared spectroscopy (FTIR) study revealed the formation of the AlN phase. The optical characteristics of films, such as refractiveindex, extinction coefficient, and average thickness, were calcu...

The present paper investigates experimentally the effect of relative humidity and roughness on friction property of mild steel under horizontal vibration. To do so, a pin-on-disc apparatus having facility of vibrating the test samples at different direction is designed and fabricated. The direction of vibration is horizontal. Horizontal vibration is created along (longitudinal direction) and pe...

The aerodynamic roughness is one of the major parameters in describing the turbulent exchange process between terrestrial and atmosphere. Remote Sensing is recognized as an effective way to inverse this parameter at the regional scale. However, in the long time the inversion method is either dependent on the lookup table for different land covers or the Normalized Difference Vegetation Index (N...

[1] Recent field and laboratory observations indicate that the variation of drag coefficient with wind speed at high winds is different from that under low-to-moderate winds. By taking the effects of wave development and sea spray into account, a parameterization of sea surface aerodynamic roughness applicable from low to extreme winds is proposed. The corresponding relationship between drag co...

OBJECTIVE The objective this work was to assess the friction coefficient between brackets and wires of different materials under conditions simulating the oral environment. MATERIAL AND METHODS Stainless steel (SS) and titanium-molybdenum alloy (TMA) wires of 0.019x0.025-in diameter (American Orthodontics) and polycarbonate bracket (American Orthodontics), ceramic bracket (American Orthodonti...

The oxidation of stainless steels 304 and 304L during hot rolling is studied in this paper. Results show the oxide scale thickness decreases significantly with an increase of reduction, and the oxide scales of both 304 and 304L stainless steels were found more deformable than the steel substrate. Surface roughness shows a complicated transfer during the hot rolling process due to the complexity...

Savannas are among the most variable, complex and extensive biomes on Earth, supporting livestock and rural livelihoods. These water-limited ecosystems are highly sensitive to changes in both climatic conditions, and land-use/management practices. The integration of Earth Observation (EO) data into process-based land models enables monitoring ecosystems status, improving its management and cons...