The mechanical behavior of multicracks under compression has become a very important project in the field of fracture mechanics and rock mechanics. In this paper, experimental and numerical studies on the fracture property of three collinear cracks under compression were implemented. The specimens were a square concrete plate, and the cracks were made by a very thin film. The tests were conduct...

Previous research has demonstrated a linear relationship between compressive strength (mortar cubes and concrete cylinders) and cumulative heat release normalized per unit volume of (mixing) water for a wide variety of cement-based mixtures at ages of 1 d and beyond. This paper utilizes concurrent ultrasonic reflection and calorimetry measurements to further explore this relationship from the t...

The objective of this study is to examine the effect of substitution of cement by three different mineral additions, on the mortar rheological and mechanical properties. This experimentation, considers the fineness of mineral additives with a constant workability. Ordinary Portland Cement was partially replaced by different percentages of slag, pozzolana and metakaolin of 10, 20 and 30%. The ob...

In this data article experimental data on the compressive strength, and the durability of styrene and bitumen modified sulfur concrete against acidic water and ignition are presented. The percent of the sulfur cement and the gradation of the aggregates used are according to the ACI 548.2R-93 and ASTM 3515 respectively. For the styrene modified sulfur concrete different percentages of styrene ar...

STATEMENT OF THE PROBLEM In clinical situations, Calcium-Enriched Mixture (CEM) comes into direct contact or even mixes with blood during or after placement. PURPOSE The aim of this study was to evaluate the effect of blood contamination on the compressive strength of CEM. MATERIALS AND METHOD Three experimental groups were included in this study. In the first group, CEM was mixed with dist...

The effect of reinforcement in the cross-linked poly(propylene fumarate-co-caprolactone diol) thermoset composites based on Kevlar fibres and hydroxyapatite was studied. Cross-linked poly(propylene fumarate-co-caprolactone diol) was also studied without any reinforcement for comparison. The reinforcing fibre acts as a barrier for the curing reaction leading to longer setting time and lesser cro...

Tubular ceramic foams were prepared by using natural clay as starting material and 120 ppi polyurethane foam as template via polymeric sponge method. Samples were sintered with different temperatures from 1200°C to 1280°C. The result shows that 1250°C is the ideal sintering temperature where the highest compressive strength of 1.980MPa at 47.31% porosity is obtained. The highest value in compre...

The aim of this study is to investigate the feasibility of using waste bricks powder of Gachsaran Company in concrete. Cement is replaced by waste bricks powder in different proportions until 40 percent by weight. pozzolanic properties of bricks powder and compressive strength of concrete were investigated. The results demonstrated that the bricks powder show pozzolanic properties. Results also...

-The simple replacement technique of cement by fly ash in concrete does not produce a concrete with desirable early strength which is a significant parameter of present day emphasis of speedier construction. Increasing the amount of flyash replacement slows down the strength development at early ages. For effective mix proportioning of fly ash concrete, cementing efficiency factor has to be tak...

High water absorption of recycled brick aggregate (RBA) is one of the most discussed parameters in terms of its application in the production of concrete-its influence on the amount of mixing water and, hence, the quality of the concrete, is usually considered negative. In this paper, different methods of decreasing the absorption of RBA and, consequently, the impact on the properties of concre...