This paper presents the results of an experimental study on the effects of elevated temperature on compressive and flexural strength of Normal Strength Concrete (NSC), High Strength Concrete (HSC) and High Performance Concrete (HPC). In addition, the specimen mass and volume were measured before and after heating in order to determine the loss of mass and volume during the test. In terms of non...

Prediction of compressive strength of concrete is very useful for economic constructions. The compressive strength can be estimated after 28 days of casting the specimen cubes or may be predicted based on the quantum and quality of ingredients used in making the concrete. When the first one requires a 28-day time, the second one does have problem of accuracy. Hence, a hybrid model is proposed i...

The aim of this paper is to carried out statistical analysis for optimization of various concrete mix proportions by using full factorial experimental technique. The variables such as 28 days cube compressive strength, water to cement ratio (w/c), coarse aggregate to total aggregate ratio (CA/TA) and total aggregate to cement ratio (TA/C) were the parameters to be used for optimization. Four w/...

This study introduces, two models based on Gene Expression Programming (GEP) to predict compressive strength of high strength concrete (HSC). Composition of HSC was assumed simplified, as a mixture of six components (cement, silica fume, super-plastisizer, water, fine aggregate and coarse aggregate). The 28-day compressive strength value was considered the target of the prediction.  Data on 159...

The aim of this study is to evaluate the moisture effect on the strength of concrete specimens that has completely cured. This study is also aimed to develop relations that can be used to determine the properties of concrete with different moisture contents that are normally experienced in outside conditions. Numerous compressions and split tensile tests are performed. In order to better unders...

In this study two series of self compacting concrete mixtures were prepared with 100% coarse recycled concrete aggregates and different percentages of 0%, 20%, 40%, 60%, 80% and 100% fine recycled concrete aggregates. In series I and II the water to binder ratios were 0.50 and 0.45, respectively. The cement content was kept 350 3 m kg for those mixtures that don't have any Nano-Silica. To impro...

todays applying concrete structures is more usual than other structures which are used in buildings as in most of the world’s countries the application ratio of concrete to steel has increased from 10 to 1. sometimes these structures require strengthening vulnerable members because of deficiency in their loading system in usual and critical conditions. there are different methods for strengthen...

This work has as objective to study the influence of mixing hour in the concrete properties such as workability and compressive strength in hot and cold weather conditions from an industrially applied point of view. The foremost studied variable was the concrete mixing hour, having used five mixing hours for every weather conditions. For each mixing hour, were carried out three concrete batches...

Nano materials have been widely used in laboratory and industrial scales in order to improve various properties of concrete and concrete mixture. The mainstream practice of the researches in this field is to add metallic nano-particles into the concrete mixture. The present research focuses on adding Micro-Nano Air Bubbles (MNAB) into water before mixing it with aggregate and cement mixtures. I...

The use of supplementary cementitious materials (SCMs) in concrete manufacturing is considered as financial, technical and environmental benefit. In this regard, this paper presents the experimental and analytical study of high strength concrete (HSC) with alccofine-1203 (alccofine) and fly ash as partial replacements to cement. A total of seven mixes were prepared with different percentages of...