Coatings are a cheap and efficient solution to protect underlying metallic substrates against electrochemical corrosion. High performance coatings do not only provide this protection of the substrate in the undamaged state but also when they are scratched. This enhanced protection can be achieved in many different ways (ranging from primers based on expansive phases which seal the crack upon sc...

Immersion-type AE sensor is needed for corrosion monitoring of underground gasoline tanks. We are developing a multi-directional optical fiber AE sensor to monitor the longitudinal AE signal through liquid (liquid-borne AE). The developed AE system is an optical-fiber-based Mach-Zender-type laser interferometer using a weak laser and is intrinsically safe. Multi-sensing function was facilitated...

In this study the corroding and/or tarnishing implications of coke, a fizzy soft drink, tea and coffee to the eta prime phase plastic amalgam surface following the filling were evaluated. Thirty six acrylic blocks were prepared which each one was having 5 mm in diameter and 1 mm in depth welts where condensed with amalgam. Those blocks were divided into six groups. The groups were coffee, tea, ...

Abstract: This research examines the performance of strengthened non-uniformly corroded reinforced self-consolidating concrete (SCC) members. This paper focuses on three aspects of concrete including corrosion, concrete cover loss, and repair technique. Up to a 50% corrosion level is considered in this study. Corrosion was experimentally induced and was simulated in other cases. Twenty-six rein...

The stability of an electrodeposited nanocrystalline Ni-based alloy coating in a H₂S/CO₂ environment was investigated by electrochemical measurements, weight loss method, and surface characterization. The results showed that both the cathodic and anodic processes of the Ni-based alloy coating were simultaneously suppressed, displaying a dramatic decrease of the corrosion current density. The co...

y-tial intermetallic alloy have a good potential for use as biomaterial, due to its good corrosion resistance. in this paper, two fundamental electrochemical techniques namely electrochemical impedance spectroscopy and potentiodynamic anodic polarization were used to evaluate the corrosion performance of g-tial in ringer's solution. surface modification treatments were employed with the pu...

Water-soluble metal working fluids are used for processing of aluminum alloy materials. This short article describes properties of new additives in water-soluble metal working fluids for aluminum alloy materials. Many half esters or diesters were prepared from the reactions of higher alcohols with acid anhydrides. Interestingly, diesters of PTMG (tetrahydrofuran oligomer, MW = 650 and 1000) and...

Corrosion protection was always an important part of industrial development. The use of oiland solvent-based products in the preservation of metal has been a common practice for over one hundred years. While these products may offer good corrosion protection, they often contain hazardous ingredients and are non-degradable. A number of regulations were implemented recently for the protection of ...

The root cause of odor and corrosion in collection systems is sulfide, which is produced from sulfate by bacteria residing in a slime layer on the submerged portion of sewer pipes and structures. Once released from the wastewater as hydrogen sulfide gas, odor and corrosion problems begin. Another type of bacteria utilizes hydrogen sulfide gas to produce sulfuric acid that causes the destruction...

A mini-flowloop was developed to study CO2 corrosion and corrosion/erosion interactions, and to assess the effectiveness of inhibitors under conditions that simulate multi-phase pipelines. The miniflowloop was used to study the effect of testing time, steel chemistry, velocity, temperature, fluid chemistry, sand and inhibitors on corrosion rates. The measured corrosion rates in inhibited and un...