Subsurface microcracks developed in a groove-rolled and cold-swaged Ti–Fe–O alloy were characterized to clarify the generation of subsurface fatigue crack. In addition, effects crystallographic texture on crack initiation growth discussed. A considerable number detected β grains, α at α-β interface. The grains grew negligibly into neighboring along basal plane. This was because these oriented w...

The fatigue crack initiation in a notched single-crystal nickel-base superalloy component at 500°C was investigated and analysed. A critical plane approach in combination with a critical distance method has been adopted, in which the total shear strain ranges on the discrete slip planes are evaluated. Furthermore, a Coffin-Manson type of expression is used to predict the number of cycles to fat...

Through investigating and comparing the fatigue behavior of an as-forged Mg-6.7Zn-1.3Y-0.6Zr (wt.%) alloy before and after solid solution treatment (T4) in laboratory air, the effect of T4 treatment on fatigue crack initiation was disclosed. S-N curves illustrated that the fatigue strength of as-forged samples was 110 MPa, whereas the fatigue strength of T4 samples was only 80 MPa. Observations...

Although a thorough understanding of fatigue crack initiation is lacking, experiments have shown that the evolution of distinct dislocation distributions and surface roughness are key ingredients. In the present study we introduce a computational framework that ties together dislocation dynamics, the fields due to crystallographic surface steps and cohesive surfaces to model near-atomic separat...

Introduction: The fracture mechanisms of bone tissue have been described as a damage accumulation process, which starts with the initiation and propagation of microcracks. Knowledge of crack initiation and propagation at tissue level (tissue fracture toughness) is critical to understand and prevent bone fractures. Tissue fracture toughness could provide valuable information for defining bone qu...

Over the last decade, significant effort has been put into mimicking the ability of the gecko lizard to strongly and reversibly cling to surfaces, by using synthetic structures. Among these structures, mushroom-like elastomer fiber arrays have demonstrated promising performance on smooth surfaces matching the adhesive strengths obtained with the natural gecko foot-pads. It is possible to improv...

In this work, the underlying micro-damage mechanisms of randomly oriented short fibre-reinforced composites were revealed based on real internal microstructural characteristics obtained by high-resolution (0.7 μm/pixel) synchrotron radiation X-ray computed tomography (SR-CT). The special 'pore dominant micro-damage processes' were directly observed through SR-CT three-dimensional reconstructed ...

Smart film crack monitoring method, which can be used for detecting initiation, length, width, shape, location, and propagation of cracks on real bridges, is proposed. Firstly, the fabrication of the smart film is developed. Then the feasibility of the method is analyzed and verified by the mechanical sensing character of the smart film under the two conditions of normal strain and crack initia...