This work proposes a methodology to compute fretting fatigue crack initiation and total life by iterative models calibrated with stress–strain-life curves. One of the main novelty such is assumption that length determined size critical distance. To separate propagation lives, numerical approach finite elements used. The incorporates not only multiaxial non-proportional characteristic stress fie...

The fracture and fatigue properties of a newly developed bulk metallic glass alloy, Zr41.2Ti13.8Cu12.5 Ni10Be22.5 (at. pct), have been examined. Experimental measurements using conventional fatigue precracked compact-tension C(T) specimens (,7-mm thick) indicated that the fully amorphous alloy has a plane-strain fracture toughness comparable to polycrystalline aluminum alloys. However, signific...

initial cracks occur in high strength concrete sleepers for various reasons, such as shrinkage and wrong curing and long lifetime of over 50 years of sleepers. these cracks may lead to complete failure of the structure. in order to more accurately design the sleepers, fracture mechanics (not strength of materials) should be incorporated. in order to achieve this purpose, it is important to fore...

Since creep strength reduction of mod.9Cr-1Mo steel welds in long-term was confirmed experimentally, residual life prediction for Type IV failure has been an important theme Ultra Super Critical (USC) plants after service. The mechanism within the fine-grained heat affected zone (FGHAZ) is twofold; increase number density voids a size comparable to FGHAZ grain (5 μm), and strain softening last ...

In this study, fatigue test and crack propagation analysis of welded joints in ships and offshore structures were performed. The test models have two types of welded joints, T-joint and double plate. Test data is presented in S-N curves obtained by the Hot Spot Stress (HSS) approach. The S-N data for each length of crack were appraised to define the fatigue life of crack initiation and propagat...

The fatigue micro crack initiation and propagation tests of a TiAl alloy with 8% Nb content were carried out by using scanning electron microscopy in situ technology at room temperature and at 750 C. These results indicated that the fatigue micro crack initiation was mainly caused by the stress concentration at room temperature, but at an elevated temperature (750 C) the multi-cracks were cau...

In this paper, the present investigation has been conducted keeping in mind some of the problems concerning the crack propagation direction and growth under constant loading in an inclined crack geometry. The present studies mainly focused on the development and modifications in the crack growth criterion to account the biaxial, shear loading and number of stress terms. Existing criteria for th...

The fatigue behavior of polyether ether ketone (PEEK) thermoplastic was investigated under uniaxial strain-controlled cyclic loading condition with various mean strains (Rε 1⁄4 0, 0.2, and 0.25). The mean stress responses of PEEK from all mean strain fatigue tests were found to be fully-relaxed. As a result, minimum mean strain effect on fatigue behavior of PEEK was observed. Fractography analy...