Results of initial investigation of thermomechanical couplings in innovative β-Ti alloy called Gum Metal subjected to tension are presented. The experimental set-up, consisting of testing machine and infrared camera, enabled to obtain stress-strain curves with high accuracy and correlate them to estimated temperature changes of the specimen during the deformation process. Both ultra-low elastic...

In nanotechnology, small-volume metals with large surface area are used as electrodes, catalysts, interconnects and antennae. Their shape stability at room temperature has, however, been questioned. Using in situ high-resolution transmission electron microscopy, we find that Ag nanoparticles can be deformed like a liquid droplet but remain highly crystalline in the interior, with no sign of dis...

The shape memory effect (SME) response of a deformation-processed NiTiNb shape memory alloy is benchmarked against the response of a cast alloy. The insoluble Nb element ternary addition is known to widen the hysteresis with respect to the binary NiTi alloy. Cast microstructures naturally consist of a cellular arrangement of characteristic eutectic microconstituents surrounding primary matrix r...

the three-phase-lag model and green–naghdi theory without energy dissipation are employed to study the deformation of a two-temperature fiber-reinforced medium with an internal heat source that is moving with a constant speed under a hydrostatic initial stress and the gravity field.  the modulus of the elasticity is given as a linear function of the reference temperature. the exact expressions ...

Phospholipid vesicles are common model systems for cell membranes. Important aspects of the membrane function relate to its mechanical properties. Here we have investigated the deformation behaviour of phospholipid vesicles in a dual-beam laser trap, also called an optical stretcher. This study explicitly makes use of the inherent heating present in such traps to investigate the dependence of v...

In the film formation of latex, particle deformation can occur by processes of wet sintering, dry sintering, or capillary action. When latex films dry nonuniformly and when particles deform and coalesce while the film is still wet, a detrimental skin layer will develop at the film surface. In their process model, Routh and Russel proposed that the operative particle deformation mechanism can be...

In large area micro hot embossing, process temperature plays a critical role in both the local fidelity of microstructure formation and global uniformity. Micro embossing at the lowest temperature with acceptable fidelity can improve the global flatness after demolding. This paper focuses on polymer deformation and recovery in micro embossing when the process temperatures are below its glass tr...

This paper presents a new approach to study the effects of temperature on the poroelastic and viscoelastic behavior of articular cartilage. Biphasic solid-fluid mixture theory is applied to study the poro-mechancial behavior of articular cartilage in a fully saturated state. The balance of linear momentum, mass, and energy are considered to describe deformation of the solid skeleton, pore fluid...

To capture the mechanical response of Ni-based materials, creep deformation and rupture experiments are typically performed. Long term tests, mimicking service conditions at 10,000 h or more, are generally avoided due to expense. Phenomenological models such as the classical Kachanov–Rabotnov (Rabotnov, 1969, Creep Problems in Structural Members, North-Holland, Amsterdam; Kachanov, 1958, “Time ...

Ultrafine-grained (UFG) pure copper of 280 nm grain size was prepared by equal-channel angular pressing. Tensile tests, strain-rate change tests and temperature change tests were conducted on UFG Cu in the temperature range between 77K and 373K. As usual, tensile strength increased as temperature decreased and strain rate increased. The activation energy of deformation increased linearly with t...