Step changes in air temperature(±20oC) or velocity (±0.8 and ±1.5m/s) were introduced in an air drying process, in relation to standard drying conditions of 70oC and 1.5m/s of air temperature and velocity, respectively. Compared to the standard, the variable conditions caused a clear difference of the moisture content of the dried material and the drying curves deviated significantly after the ...

drying characteristics of green pea (pisum satium) with an initial moisture content of 76% (db) was studied in a fluidized bed dryer assisted by microwave heating. four drying air temperatures (30, 40, 50 and 60ºc) and five microwave powers (180, 360, 540, 720 and 900w) were adopted. several experiments were conducted to obtain data for sample moisture content versus drying time. the results sh...

Wood preservative treatments are indispensable for wood used in severe environmental conditions. Decay occurs in preservative-treated woods due to the poor impregnation of sapwood; this problem has recently gained attention for Cryptomeria japonica kiln-dried logs. To clarify the causes of this phenomenon, the influence of drying temperature on the penetration of preservative into sapwood logs ...

Nanostructured silica based xerogels and aerogels are prepared by sol-gel technology, using methyltrimethoxysilane as precursor. The influence of the drying method and conditions on the microstructure of the obtained materials is investigated, since the drying stage has a critical influence on their porosity. Two types of drying methods were used: atmospheric pressure drying (evaporative), to p...

in this paper, experimental data on the drying kinetics of corn in a packed and fluidized bed are presented. experimental research was conducted on a laboratory apparatus. corn was used as a material because of its significance in agriculture and the food industry. an analysis of the influence of the operational parameters (the drying medium velocity i. e. the fluidization number, the drying me...

In the present work, the drying of calcium carbonate in a batch spouted bed dryer with inert particles has been investigated experimentally. The effect of several operating parameters including air temperature (90, 100, and 110 ˚C), air velocity (Ums, 1.2 Ums, and 1.5 Ums), and dry solid mass (5, 10, 20 g) has been studied. The Taguchi method has been applied to determine the optimal parameters...

in some conditions, to avoid deterioration and field losses of soybean seeds (glycine max merr.) from weathering at end of the season, farmers start to harvest seeds with a high moisture content and so, careful post-harvest drying would be required to maintain the physiological quality of seeds. response surface methodology (rsm) was used to optimize the operating conditions of soybean seed dry...

Spirals as internals are utilized to reduce the axial mixing of solids in fluidized beds, by routing the solids flow in a predetermined route or by localizing the solids mixing. The drying kinetics of continuous fluidized bed with and without internals has been compared and modeled using batch drying kinetics and residence time distribution analysis. The batch drying experiments were conducted ...

Spray drying is a commonly used method of drying a liquid feed through a hot gas. This study aims to obtain the empirical model of the spray drying process of full cream milk using a nozzle atomizer spray dryer, Lab-Plant SD 05 Laboratory Scale Spray Dryer. Inlet air temperature was chosen as the manipulated variable and outlet air temperature was the controlled variable. No disturbance was con...