J. Cárcel-Carrasco; M. Pascual; M. Pérez-Puig; F. Segovia. ITM-Universitat Politècnica de València (Spain). Camino de vera s/n, 46022 Valencia (Spain). Corresponding author, Email: [email protected] This work compares the weldability of ductile iron when: (I) a root weld is applied with a tungsten inert gas (TIG) process using an Inconel 625 source rod and filler welds are subsequently applie...

An on-line monitoring and prediction of surface roughness in grinding is introduced with experimental verification. An adaptive neurofuzzy inference system (ANFIS) is used to monitor and identify the surface roughness online. The system uses a piezoelectric accelerometer to generate a signal related to grinding features and surface finish. The power spectral density (PSD) of this signal is used...

Grinding is finishing process aimed at achieving surface quality and dimensional accuracy in workpieces with tight tolerances especially from materials with a high degree of hardness and strength. The grinding process of superalloys is faced with problems and challenges caused by the generation of excessiveheatas well as the adhesion of workpiecematerialon the grinding tool. Therefore, in-depth...

Two of the important parameters in grinding operation are surface roughness of the workpiece and the amount of consumed energy. These parameters are strongly affected by the condition of grinding wheel surface which is dependent on the dressing parameters. Predicting the roughness of the grinding wheel surface after dressing with known dressing parameters can improve the grinding process. Resea...

The grinding process consists of an abrasive contact between a moving workpiece and a wheel in rotation [1]. Because of the grinding power converted into heat at the interface, high temperatures can appear that can lead to thermal, mechanical or metallurgical consequences. Each of these effects has been fully related in literature by authors. Guo presents a good review of surface layers (dark, ...

The purpose of this study was to evaluate grinding efficiency in abutment teeth comprising both dentin and core composite resin in the axial plane. Grinding was performed over 5 runs at two loads (0.5 or 0.25 N) and two feed rates (1 or 2 mm/sec). The grinding surface was observed with a 3-D laser microscope. Tomographic images of the grinding surfaces captured perpendicular to the feed directi...

Fracturing by ductile damage occurs quite naturally in metal forming processes, and ductile fracture of strain-softening alloy, here 42CrMo steel, cannot be evaluated through simple procedures such as tension testing. Under these circumstances, it is very significant and economical to find a way to evaluate the ductile fracture criteria (DFC) and identify the relationships between damage evolut...

Ductile-brittle fracture transition was investigated using compact tension (CT) specimens from -70 o C to 40 o C for a carbon steel. Large deformation finite element analysis has been carried out to simulate the stable crack growth in the compact tension (CT, a/W=0.6), three point-point bend (SE(B), a/W=0.1) and centre-cracked tension (M(T), a/W=0.5) specimens. Experimental crack tip opening di...

We perform a large-scale statistical analysis (>2000 independent simulations) of the elongation and rupture of gold nanowires, probing the validity and scope of the recently proposed ductile-to-brittle transition that occurs with increasing nanowire length [Wu et al. Nano Lett. 2012, 12, 910-914]. To facilitate a high-throughput simulation approach, we implement the second-moment approximation ...

Seismic evaluations of many existing deck-truss bridges have revealed the vulnerability of their substructure and members of their superstructure. An innovative retrofit strategy developed by the authors includes replacement of the existing non-ductile end and lower-end bracing with ductile panels by incorporating energy dissipating devices to act as fuses, which can yield and dissipate energy ...