This paper refers to some simulation tests concerning the formability and springback of a U-shaped part manufactured from tailor welded stripes. The final geometry of the obtained part is seriously affected by springback phenomenon. This paper work is trying to prove out the important role samples dimension has on the springback phenomenon. The influence of the samples width on the tailor welde...

Two welded (respectively virtual) link diagrams are homotopic if one may be transformed into the other by a sequence of extended Reidemeister moves, classical Reidemeister moves, and self crossing changes. In this paper, we extend Milnor’s μ and μ̄ invariants to welded and virtual links. We conclude this paper with several examples, and compute the μ invariants using the Magnus expansion and Pol...

Two welded (respectively virtual) link diagrams are homotopic if one may be transformed into the other by a sequence of extended Reidemeister moves, classical Reidemeister moves, and self crossing changes. In this paper, we extend Milnor’s μ and μ̄ invariants to welded and virtual links. We conclude this paper with several examples, and compute the μ invariants using the Magnus expansion and Pol...

For the fatigue design of a large scaled welded structure, the readily accessibility of various engineering tools is required for the static, fatigue, dynamic analysis and parametric study. In this paper, a multi-agent system is suggested for the development of distributed, open and intelligent design system. The developed design system is applied to assess cumulative fatigue damage on the weld...

Limiting dome height (LDH) tests were used to evaluate the formability of laser butt welded blanks of the dual phase 980 steel in comparison with the base metal. Two different lasers were used: diode and Nd:YAG, giving a wide range of welding thermal cycles. A sharp decrease in LDH was observed in the welded specimens due to the formation of a softened zone in the outer heat affected zone. Soft...

The detection and classification of the defects in the welded components are very important in order to ensure the structural integrity of the fabricated components of the test blanket module (TBM). RAFM steel is used as structural material for the TBM, therefore ultrasonic based technique are the most suitable for high sensitive defect detection. In this work ultrasonic pulse echo technique is...

For hot extrusions of magnesium alloy sheets, Dissimilar AZ80 and AZ31 were used, in which AZ80 was placed on advancing side and AZ31 on retreating side, using friction stir butt welding with different process parameters. Some defect-free welded joints with good weld surfaces could be obtained with some suitable welding conditions. The maximum tensile strength of welded joint which is 225.5 MPa...

Tailor Welded Blanks (TWBs) made of dissimilar, uniform or non uniform thickness materials have potential applications in automobile industries for light weight materials in order to improve fuel efficiency and cost of carrier. The focus of this paper is to develop and present analytical model to determine total elongation of tailor welded blank (TWBs). The validation of this method is done by ...

Hydraulic support is the main supporting equipment of the coal mining systems, and they are usually subjected to fatigue failure under the high dynamic load. The fracture positions are generally at welded joints where there is a serious stress concentration. In order to investigate and further improve the fatigue strength of hydraulic support, the present work first located the possible positio...