Measurements of mean velocity, turbulence intensity, and turbulent shear stresses are presented for the mixing region of a film cooling situation in which the coolant is laterally injected. Measurements are performed using triple-wire anemometry so that all three mean velocity components are documented. Such measurements also give Reynolds stress terms in the flow field. Flow with one row of fi...

Cryopreservation is the most promising way for long-term storage of biological samples e.g., single cells and cellular structures. Among various cryopreservation methods, vitrification is advantageous by employing high cooling rate to avoid the formation of harmful ice crystals in cells. Most existing vitrification methods adopt direct contact of cells with liquid nitrogen to obtain high coolin...

We report the growth of graphene at a low temperature using the cold wall chemical vapor deposition technique (CWCVD). Few layered (~6-8 layers) graphene were grown on nickel-coated silicon with acetylene as the precursor gas. The advantage of the combination of the acetylene (as a carbon feedstock) and the nickel catalyst was the lowering of the graphene growth temperature. Nickel coated silic...

We report on the design, operation, and performance of a thermal evaporation chamber capable of evaporating organic thin films. Organic thin films are employed in a diverse range of devices and can provide insight into fundamental physical phenomena. However, growing organic thin films is often challenging and requires very specific deposition parameters. The chamber presented here is capable o...

The critical field of a thin superconducting film with a blind circular hole is found theoretically. It is shown that the value of the critical field is sensitive to the bottom thickness, but the orbital momentum, i.e., the number of vortices which nucleate inside the hole, is not sensitive. A simple boundary condition for a steplike thin film is derived and used for comparative numerical analy...

In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the ag...

Film cooling is widely applied as an effective way to maintain the turbine blade temperature at acceptable level. The present paper investigates overall effectiveness and flow structure by performing conjugate heat transfer simulations for flat-plate baseline cylindrical three cratered film-cooling holes. in fluid domain obtained using Shear Stress Transport turbulence model, solid conductivity...

While most plastic films are manufactured by blown film extrusion, their first-principles modeling has remained substantially more challenging than for most other chemical engineering unit operations due to its combination of heat transfer, crystallization, and non-Newtonian fluid mechanics. This paper applies maximum-likelihood parameter estimation to characterize the convective heat transfer ...