in the present study, the effect of various weight fractions of graphene nanoplatelet (gpl) on flexural fatigue behavior of epoxy polymer has been investigated at room temperature and generally the temperature was monitored on the surface of specimen during each test. the flexural stiffness of grapheme nano-platelet/epoxy nanocomposites at 0.1, 0.25 and 0.5 wt. % as a main effective parameter o...

Increasing the efficiency of wind turbines will be vital for the wind energy sector to continue growing. The drive for increased efficiency is pushing turbine manufacturers to shift from glass fibre composite blades towards carbon/glass fibre-hybrid composite blades. This shift brings significant challenges in terms of optimising the design and understanding the failure of these new blade mater...

The aim of this paper is to study the effect of silane treatment on woven banana fabric based unsaturated polyester resin composites. The fabric was treated with vinyl triethoxysilane. Woven banana fabric (WBF) reinforced unsaturated polyester resin (UPR) composites were fabricated by hand lay-up technique. The fabric content in the composite was kept constant to 35 %. The variation in the mech...

Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the lightcured samples were assessed by three-point flexural strength, diametral...

In the present work, novel Ultra-high molecular weight polyethylene (UHMWPE) composites reinforced with 3wt. %, 6wt. %, 9wt. %, 12wt. % and 15wt. % PEEK particles are fabricated by using hot compression moulding technique and mechanical properties are investigated. Experiments were conducted as per ASTM standards to evaluate the properties of tensile, flexural, impact, and microhardness. The re...

Natural fibers are used in polymer composites to improve mechanical properties to replace inorganic reinforcing agents produced by non-renewable resources. The present study investigates the tensile and flexural behaviors of palm fibers-high density polyethylene (HDPE) composite as a function of volume fraction. The surface of the fibers was treated by mercerization treatments to improve the we...

Glass–ceramic filler particles containing various amounts of fluoroapatite–mullite crystalline phases were synthesised using SiO2–Al2O3–P2O5–CaF2–CaO system as the base glass formulation. Different additives were used to promote crystallisation in this system. Composite samples were prepared by incorporating the silane treated glass–ceramic particles into the BisGMA/TEGDMA (60 : 40 mass ratio) ...

Hemp fibers–reinforced unsaturated polyester (UP) composites were prepared by hand lay-out compression molding. Hemp fibers were treated with isocyanatoethyl methacrylate (IEM), using dibutyltin dilaurate as a catalyst. The results indicated that fiber treatment significantly increased tensile strength, flexural strength, flexural modulus, and water resistance of the resulting composites, and y...

In order to explore the mechanical properties of reinforced concrete members under action ultra-low temperature and load coupling, research group carried out flexural axial tension test beam temperature. The results show that tensile stiffness increases nonlinearly when decreases from 0°C –100°C. When is below –100°C, almost remains unchanged. drops –165°C, constraint strain between reinforceme...

This paper presents experimental research on reinforced concrete (RC) beams with external flexural and flexural–shear strengthening by fibre reinforced polymer (FRP) sheets consisting of carbon FRP (CFRP) and glass FRP (GFRP). The work carried out has examined both the flexural and flexural–shear strengthening capacities of retrofitted RC beams and has indicated how different strengthening arra...