The development of tools for the synthesis, design, and optimization biorefineries requires deep knowledge thermochemical processes involved in these schemes. For this project, three models from scientific literature were implemented to simulate processes: fast pyrolysis a fluidized bed, fixed-bed, fluidized-bed gasification using Aspen PlusTM software. These allow user obtain performance, cons...

The hydrodynamics in a 152 mm ID bubbling fluidized bed filled with 500-600 μm glass beads have been simulated using the computational fluid dynamics (CFD) code Fluent 6.3, and the results are compared to experimental data obtained using pressure measurements and 3D X-ray computed tomography. The grids in a Cartesian coordinate system used in simulations are made by 2D (8×8 mm, 4×4 mm, 2×2 mm, ...

ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. the solid particles obtained in this process of drying were semi-porous and known as the group d of geldart classification. the variations of moisture content with resident time, the effects of bed height on the pressure drop, and the influence o...

Waste management is a distinct practice aimed at reducing its effects on health and the environment and increasing energy and material recovery. The urban waste management industry has been slow to adopt new technologies, such as sanitary landfills and incineration, which enable better treatment results. The aim of a thorough ecological-economic evaluation of different treatment technologies is...

This paper presents an attempt to optimize fluidized bed drying of wet and adhesive particles (with an initial diameter of about 580 mm) with the use of stirring, and discusses the influence of stirring on the total drying time. The goal was to demonstrate the positive effect of stirring a fluidized bed to the drying time, to find the optimal parameters (stirrer design, speed, and size). Experi...

Micro-fluidized bed (MFB) is a novel technology for engineering processing and screening application due to its good mixing, high mass/heat transfer, reduced reaction time cost, but issues that remain unresolved are the low fluidization quality scalability. In this review paper, fundamental characteristic studies reviewed gain an understanding of miniaturized fluidized system rapid screening. S...

Iron ore and coal are the two major important raw materials being used in Iron making industries. Usually ore fines containing around 5% Alumina are rejected due to higher proportion of alumina. Therefore, a technology or process which may reduce the alumina content by 2% by beneficiation process will be highly attractive . In addition fine coals with ash content is used nearly 12% is directly ...