Measurements of the optical gain in a semiconductor laser using a 20 MHz resolution optical spectrum analyzer are presented for what is believed to be the first time. The high resolution allows for accurate gain measurements close to the lasing threshold. This is demonstrated by gain measurements on a bulk InGaAsP 1.5 microm Fabry-Perot laser. Combined with direct measurement of transparency ca...

Since ALMA instrument will have low noise receivers with very large instantaneous bandwidth, gain stability should be carefully specified to avoid limiting the sensitivity of the total system. This memorandum reviews the methods for the characterization of gain stability in the time and frequency domain and presents examples of experimental setups used for its measurement in the case of cryogen...

We report the measurement of intermodulation gain greater than unity in NbN superconducting stripline resonators. In the intermodulation measurements we inject two unequal tones into the oscillator—the pump and signal—both lying within the resonance band. At the onset of instability of the reflected pump we obtain a simultaneous gain of both the idler and the reflected signal. The measured gain...

This application note outlines the use of the ispPAC®10 in differential circuits for bridge networks. The ispPAC10 architecture is well suited for instrumentation measurement since both inputs and outputs are differential. In-System Programmability (ISPTM) and programmable gain control allow the user to reconfigure the device characteristics after it is soldered onto a circuit board. System off...

We report on a direct measurement method for acquiring highly precise reflectance spectra of gain elements for semiconductor disk lasers under optical pumping. The gain element acts as an active mirror, and the active mirror reflectance (AMR) was measured with a weak and tunable probe beam coincident on the gain element with a high-power pump beam. In particular, we measured the spectral AMR of...

A cooperative program between the Jet Propulsion Laboratory and the National Bureau of Standards will result in the gain measurement of a horn antenna using three different techniques: a two-antenna insertion loss measurement, a pattern integration method, and a near-field measurement method. This article describes the application of the pattern integration method and also the evaluation of the...

Motivated by an important biomarker study in nutritional epidemiology, we consider the combination of the linear mixed measurement error model and the linear seemingly unrelated regression model, hence Seemingly Unrelated Measurement Error Models. In our context, we have data on protein intake and energy (caloric) intake from both a food frequency questionnaire (FFQ) and a biomarker, and wish t...

In order for using building simulation tools, validation of building simulation should be evaluated. Integrated Environmental Solution (IES) is an environmental design tool which couples an intuitive 3-dimensional modeling interface with extensive performance analysis function covering different criteria such as day lighting, heat gain and energy. The validity of IES ha...

A triangular-slot antenna with rectangular patch for 2.3/3.3 GHz WiMax applications has been implemented on DICLAD 527 substrate (relative permittivity εr = 2.5) with 1.524 mm of substrate thickness. A rectangular patch printed on one side of the substrate is fed by a 50 Ω microstrip line and acts as the frequency tuning stub, while the triangular slot is positioned on the opposite side of the ...

background and aim: as the most perceived and articulated errors of hearing aid users occur in high frequency speech phonemes, this study aimed to find a way to amplify and reconstruct the errors. thus, the study first prepared a recorded form of two persian fricative consonants as stimulus; then, the rate of the prescribed gain of the two methods of national acoustic laboratories-nonlinear 2 (...